Would mixing 80/20 Bronze with Phosphor Bronze guitar strings be a good way to alter the tonal balance of a particular acoustic guitar?



Asked by: Don Kaminsky

Which is better phosphor bronze or 80/20 bronze?





Basically phosphor bronze is 92% copper—so a little bit more copper than 80/20 bronze—has about 8% tin and contains trace amounts of phosphorous, which is what makes it a little bit more corrosion resistant compared to 80/20 bronze.

Can you use bronze strings on an acoustic guitar?

The main two types of acoustic string you’ll see are 80/20 bronze, and phosphor bronze. 80/20 bronze, or brass, is an alloy made from 80% copper and 20% zinc.

Which is better bronze or phosphor bronze?

The key difference between bronze and phosphor bronze is that the bronze is an alloy of copper, whereas the phosphor bronze is a type of bronze in which phosphorous is added as an additional component.

What is the difference between phosphor bronze and 80/20 bronze guitar strings?

So the differences between them kind of just revolve around the composition of the strings the metals used in them the 80/20 bronze set is more old-school.

What happens when phosphorus is added to bronze?





The phosphorus reduces the viscosity of the molten alloy, which makes it easier and cleaner to cast and reduces grain boundaries between crystallites.

What is the difference between bronze and phosphor bronze acoustic strings?

Bronze is technically an alloy of copper and tin. Phosphor Bronze acoustic guitar strings offer a tone with both warmth and sparkle. The strings are named after the wrap wire material, which is a copper alloy wrap wire with roughly 8% tin and a small amount of Phosphorous.

What are the warmest sounding acoustic guitar strings?

Best Acoustic Guitar Strings for Warm Sound – In-Depth Review

  • Ernie Ball Aluminum Bronze Medium Light Acoustic Guitar Strings.
  • Martin Guitar Authentic Acoustic Lifespan 2.0 MA150T.
  • Elixir Strings 80/20 Bronze Acoustic Guitar Strings.
  • Ernie Ball Paradigm Phosphor Bronze Medium Light Acoustic Guitar Strings.

Are phosphor bronze strings better?

Phosphor Bronze – Phosphor Bronze acoustic guitar strings are a bit warmer and airy than regular bronze strings. A lot of players think that this makes them better for finger picking. They also have a bit more of a red or copper color to them as well.

What are the loudest acoustic guitar strings?

Most commonly guitarists say that 80/20 phosphor bronze strings seem to give the loudest sound, mostly due to the bright tone they produce especially when new. Another major factor with strings affecting volume is the gauge (thickness) of the strings.



Are phosphor bronze strings brighter?

A: Simply put, the difference lies in the tone of the strings. Phosphor bronze has a copper/tin alloy, making them sound brighter.

What strings does Ed Sheeran use?

According to his guitar tech, Sheeran only uses Elixir Acoustic Nanoweb light 12-53 strings. He also used Dunlop Trigger capo on some songs. However, Ed went back to his roots and was been seen playing the Martin LX1E Electro Acoustic Guitar in Natural in performances during 2017.

Can you use phosphor bronze strings on a classical guitar?

The answer I have found works well is to use Newtone Heritage strings . 010 to . 043 gauge. These are “normal” steel and phosphor bronze – low tension – acoustic guitar strings and are hand wound in England.



Can you put extra light steel strings on a classical guitar?

NEVER PUT STEEL STRINGS ON A CLASSICAL GUITAR. It has a thinner top and lighter bracing and is likely to break due to the higher tension of steel strings. Most classical guitars also don’t have a truss rod, so even lighter gauge steel strings will result in permanent damage if not snapping of the neck.

Can you put classical strings on a steel string guitar?

In fact, yes, you can… but you can’t use “traditional” Classical/nylon guitar strings if your steel-string acoustic is like most–where your ball-end acoustic strings are held in place with bridge pins… Classical guitar strings don’t have these ball ends, and have to be tied onto the bridge. This is important to note.

Is it OK to put acoustic strings on classical guitar?

In a word, NO! Putting acoustic (metal) strings on a classical guitar will put too much strain on the guitar when it is tuned. You could put classical (nylon) strings on an acoustic guitar without damaging it but it would be unlikely to sound very good.

What happens if you put nylon strings on a steel string guitar?

When you put nylon strings on a steel string acoustic guitar you may experience some weirdness including: The high G, B, and E strings may be too thick for the nut slots. The strings may buzz excessively. The action may feel too low (usually goes hand-in-hand with buzzing).



Can I use ball end strings on classical guitar?

String manufacturers state right on the package their ball-end nylon strings are ok to use on classical guitars with a tie-block bridge. But, most experienced players recommend they NOT be used, for a variety of reasons.