Asked by: Lauren Sanchez
Is Jatoba good for fretboard?
Jatoba is a great fretboard tonewood thanks to its hardness and strength. It offers a bright top-end, round midrange, great projection, and superb clarity. Jatoba can be used in acoustic tops, backs and sides. It’s difficult to work and typically only used in commercially-viable guitar fretboards.
How do you treat a Jatoba fretboard?
Jatoba isn’t the hardest, but it’s not the softest either. It isn’t quite as oily as rosewood or ebony and does have a tendency to dry out as it is not a finished wood, so care must be taken to keep it maintained – many guitarists swear by boiled linseed oil for moisturizing their Jatoba board.
Is Jatoba better than rosewood?
Rosewood, while also a warmer sounding wood, lacks the midrange character of jatoba. It makes up for this in a different way with a slightly fuller bottom end. There’s less upkeep with rosewood, as it’s naturally more oily and less porous. You’ll also notice a smoother appearance when up close, compared to jatoba.
Can you use lemon oil on Jatoba?
I didn’t even think about this issue on my Ibanez bass. It looked a little dry, so I just did rubbed a little lemon oil in just like any other guitar, and it responded just like any other guitar. Only after seeing this thread did I look my bass up to find that it has a Jatoba fretboard.
What is Jatoba wood good for?
Applications: Railroad crossties, tree-nails, gear cogs, wheel rims, steam-bent parts, tool handles, decking, plywood, furniture, flooring.
What is the best wood for a fretboard?
The Big Three Fretboard Woods
- Ebony. Considered the supreme tonewood for fingerboards due to its solidity, resiliency, and firmness, ebony was the primary fretboard wood in use from the 15th century till very recently. …
- Rosewood. …
- Maple. …
- Indian Laurel. …
- Ovangkol. …
- Padauk. …
- Pau Ferro. …
How long should you leave lemon oil on fretboard?
If you use a product that is pure lemon oil, you will not have a problem. I put one to two drops (depending on the size of the fret) on each fret and lightly rub it in with a clean, cotton cloth. Let it sit for about 10 minutes, then remove any excess.
Is linseed oil good for guitar fretboards?
The wood can dry out over time, and an oil like this, or linseed oil, or even mineral oil, can protect the wood and beautify it as well. Don’t overdo it. Once a fretboard has been oiled a few times, you can slow down the frequency.
Can I use mineral oil on my fretboard?
If your fingerboard is free of gunk, all you need to do is oil it. Buy a bottle of mineral oil at the grocery store. With all the strings off the tuners and stuffed into the sound hole, apply some oil on a folded paper towel and wipe it on the face of the fingerboard. It’s fine to wipe it on the frets.
Can I use WD40 on my fretboard?
It’s ok to use WD40 for it’s cleaning properties on gooey spots. Just, spray on a cloth, not on the spot to clean, clean quickly and wipe it off quickly. And DON’T use it as a regular cleaner on bare wood when you don’t need it, OR use it as a substitute for specialized oils on the fretboard.
Is lemon oil good for fretboards?
Do NOT use any kind of lemon oil on your maple fretboard–regardless of whether the product contains actual lemon oil or not. Instead, stick to fretboard conditioners like Music Nomad’s F-ONE Oil (may favorite) or plain mineral oil. These don’t contain lemon oil or any artificial colors that can discolor maple.
Can I use olive oil on my guitar?
You must NOT use coconut oil, olive oil, lemon oil or vinegar on your guitar either the strings, fretboard or any other part. all of these products can cause unrecoverable damage to the wood of your guitar because they are acidic.
How do you rehydrate a fretboard?
Like this fender quick clean the pores on the finished maple fretboard are essentially sealed and the cleaning spray should do the trick. Never use any oil-based. Product on the finished neck.
Can I put baby oil on my guitar?
quintusvw 7 years ago. A little buit of a tip for string longevity on electric guitars. Put a bit of baby oil on a cloth and swipe it over the strings. They will not rust!