When recording acoustic guitar with a pickup, minor mistakes become notable. Solutions?

Asked by: Jamie Coleman

How can I make my acoustic guitar sound better when recording?

Top Ten Tips for a Great Acoustic Guitar Recording

  1. Use a condenser microphone. …
  2. Avoid too much bass. …
  3. Be aware of the sweet spot. …
  4. Use New Strings. …
  5. Record Direct. …
  6. First Fret Brilliance. …
  7. Record in Stereo. …
  8. Double-track with different mic techniques.

Does pickup affect acoustic guitar?

You get used to the sound difference. You really only notice the difference at the time you install the pickup because you are used to the guitar without it.

What part of an acoustic guitar has the most impact on the sound?

Top (Soundboard) Woods

The top of the guitar has the most impact on the sound of the guitar than any other part. It is the vibrations of the top that gives a guitar its distinctive tonal character.

What level should guitar be recorded at?

As a general rule, guitars should be recorded at an average level of about -18dB. It is acceptable for peaks to go up to around -15dB. Clipping should always be avoided.

How can I make my acoustic guitar sound better with a PA?

Getting a Great Live Acoustic Guitar Tone

  1. Have Your Own Direct Box. The DI is how your guitar interfaces with the PA, and like everything else in the signal chain, it has an effect on your sound. …
  2. Bring Your Own Cables. …
  3. Use a Notch Filter. …
  4. Employ a Feedback Eliminator. …
  5. Know Your Effects.

What is a passive pickup on an acoustic guitar?

Passive pickups are those that don’t require any electronics to alter the sound (for example, by adding bass frequencies) before sending it to an amplifier or PA system.

What dB level should I record acoustic guitar at?

Recording guitar at around -14 dB is a good starting point. The most important point to keep in mind is to avoid clipping. Recording guitar at around -14 dB should avoid clipping, but you may need to raise or lower your level depending on your style of playing.

What is a good gain for recording?

So maintaining the same concept of optimal gain staging that you use during recording is your best bet: –18dBFS is a good average level to aim for. Keeping it conservative will help you maintain proper gain structure throughout your mix.

Should guitar be recorded mono or stereo?

In conclusion, as a rule of thumb, you record an acoustic guitar in mono if it is a part of a bigger or busier mix and you’d record it in stereo if it is played solo (alone) or in a spare mix.

Should I record guitar with or without effects?

Many formally trained studio engineers learned early on that guitarists should be discouraged from using effects and some will also insist that guitars are recorded in acoustically dry environments with a view to adding ambience later.

Should I record guitar and vocals separately?

Recording the guitar part alone, and then overdubbing the vocal, may help create a more professional sound. If you’d like to keep a steady tempo—especially important if you plan to overdub additional instruments—you may want to record to a click track, basically a metronome that you can hear in your headphones.

Should you record acoustic guitar in stereo?

Simply put, if you want to record the best possible range of high and low frequencies for your acoustic track, using stereo recording is your best bet, otherwise you will end up with a fraction of the frequencies that are not nearly as wide in range.

Where do you put the microphone when recording an acoustic guitar?

Mic Stuff: 7 Critical Tips on How to Mic an Acoustic Guitar

  1. Do not place the microphone directly in front of the sound hole. …
  2. For a balanced sound that captures high end, place the mic about 12 to 16 inches away from the 12th fret.