What are Extra Jumbo Frets?



Asked by: Gary Jay

A jumbo fret is made with a thicker gauge wire, and consequently the top of the fret is further away from the fretboard. The claimed playing advantages are: you can get your fretting-hand fingers further down in the gap to the side of the string, allowing you to put sideward pressure on the string more easily.

What are extra jumbo frets good for?





Wider frets are often attributed a smoother, more buttery playing feel, which also makes it easier to bend strings. Ease of bending is also enhanced by taller frets, whether wide or narrow.

Are extra jumbo frets better?

In fact if you are a very physical guitar player, then you might be better off looking at jumbo frets. Like modern narrow and tall frets, the height of jumbo frets makes string bending and fretting easier. Here though, the added width of the frets helps to offset some of the drawbacks of tall and narrow frets.

Are jumbo frets good for beginners?

If you are a beginner, or strictly a rhythm player, small to medium frets will do you great – easy chording and sliding from one barre chord to the next without feeling like your going over speed bumps. But if you are a lead player doing lots of bending and vibrato, the jumbo frets are the only way to go!

What size are extra jumbo frets?

However in contrast to vintage jumbo frets, jumbo frets are also tall. They have a width of . 110″ and a height of . 055″.

What fret size is easiest to play?





On the other hand, jumbo 6100 fret wire can provide easier playability with better sustain, tone and bending because you don’t have to press as hard to fret the strings, but your fingers probably won’t even touch the fingerboard, which could take some getting used to if you’re accustomed to smaller frets.

What size frets did SRV use?

The guitar featured frets that measured 0.110″ wide by 0.055″ when new, similar to Dunlop 6100 fretwire. String height was measured to be 5/64″ on the high E string and 7/64″ on the low E string. Each string had three full winds for the best angle at the bone nut.

What fret size is best?

Short frets like the 6230, 6150, and 6130 are good for people who really like to feel to fingerboard when they play chords. What is this? Whereas, jumbo or medium-jumbo frets feel smoother, provide extra sustain, and can let you bend without exerting as much force.

What kind of frets does Martin use?

Martin uses Jescar as a supplier. Frets are a personal choice for sure.

Which guitars have extra jumbo frets?

29 Guitars With Extra Jumbo Frets



Model Pickups How Many Frets?
ESP LTD M-HT 1 Seymour Duncan Blackened Black Winter humbucker 24 Stainless steel
ESP LTD F-Black EMG 81 humbucker 24 Stainless steel
Schecter Banshee GT FR EMG 81 & 60 humbuckers 24
ESP LTD EC-1000 Vintage Black – Best Overall – Read The Review EMG 81 & 60 humbuckers 24

What is the most popular fret wire size?

Medium Jumbo fret wire is the most commonly found of all fret sizes nowadays as they provide a great balance between fast playability and ease of bending. You’ll find these on the majority of higher Fender and Gibson guitars and they are generally sized around 2.6mm (. 106”) wide and 0.9mm (. 036”) tall.

Does fret size affect tone?

But while players can argue about the sound of various fretwire, the effect that frets have is far more about feel and durability than it is about tone. New, freshly dressed, and worn frets each affect the feel and the ability of a guitar or bass to intonate, and that will in turn affect the tone.

How much Fretwire do I need?

Typically, a guitar can be done with between 5 and 6 feet of wire. If you go to our choosing fretwire page you will see that every size has a feet per pound column. You can calculate how many guitars can be done with a pound by dividing The feet per pound by 5-6 feet.



When should a guitar be Refretted?

How Often Do Guitar Frets Need To Be Replaced? Typically, you replace your guitar fret bars (refret) after 20-30 years. Whereas you can perform a fret dressing more often – every 3 years or so.

Why do my frets wear so fast?

Every time you press your strings against the frets, the friction between them subtly changes the shape of the frets, causing them to wear out. Over time, this metal-against-metal contact can lead to string rattle and intonation issues. The greatest fret damage is caused by capos—especially under the plain strings.

Are medium jumbo frets good?

A Medium Height and Medium Width provide great playability potential, which makes bends and vibrato easier by allowing you to get ‘under’ the string easier. This sized fret, often called Medium-Jumbo, provide enough width and height that bending and vibrato don’t suffer.

Why are stainless steel frets better?

If you have a guitar you love and you want a refret, just get them done with the SS frets… it’s almost like your finger strength has been increased! PROS: considerably longer fret life, bends are much smoother, vibrato is much easier, more responsive to your attack, they never get dull.



What are Ibanez jumbo frets?

There isn’t really a true standard definition of “Jumbo” frets. It’s defined differently by different manufacturers and Ibanez uses a range of different fret sources in their guitars made in various markets around Asia. Typically “Jumbo” fretwire will measure around 0.105″ wide by 0.050″ high.