What am I doing wrong with my new alto recorder?



Asked by: Rachel Brooks

What is wrong with my recorder?





If you have the joints of your recorder. Position wrongly it means you're gonna have bad posture.

How do I tune my alto recorder?

So two notes and in tune when they have a kind of still settled quality you can hear something is out of tune because it's kind of buzzing.

How do you play a new recorder?

First just to keep the pitch off especially. If you're playing with modern instruments. And the other reason is actually more important and that is to do with moisture.

Should I oil a new recorder?

A new recorder should be oiled very regularly in the first few months. Depending on the type of wood this should be done every three to four weeks. It is much better to oil more often but little at the time rather than drench the recorder in oil only once in a while.

How do I fix my voice recording?





Down and select where it says recording audio and select. Run and then hopefully would have been able to resolve the problem if you're still having an issue you can go back to system.

How do you play the recorder smoothly?

You want to start off in the best way possible. So go do that number two making sure your fingers are moving exactly together now due to the joys of the recorder.

Can recorders be out of tune?

A note that is too low can be tuned by moving the hole up the instrument (towards the windway) or by enlarging it. Inversely a note that is too high can be tuned by moving the hole down the instrument or by reducing its diameter.

Can a recorder go out of tune?

If the recorder is generally out of tune, it can be “pulled out” or “pushed in.” In other words, the head joint can be slightly pulled away from the body, lengthening the instrument and lowering its pitch, or pushed back in, raising its pitch back up.

Is recorder hard to play?

Compared to other instruments, the recorder is relatively easy to play, making it a great first instrument for kids or novice musicians. They come in many different colors and sizes to fit you. Recorders are a good stepping stone to harder blowing instruments that are held vertically, such as oboe or clarinet.



Why is my audio recording not working?

Here’s how to launch the audio troubleshooter: Go to Start > type ‘settings’ > double-click on the first result to launch the Settings page. Navigate to Update & Security > select Troubleshooter > right-click on the ‘Recording Audio’ troubleshooter. Run the tool and follow the on-screen instructions to fix the problem.

Why is my audio so glitchy?

Typically the receiver’s connection is stalling due to over-utilization. Alternately, the listener’s audio equipment may be malfunctioning due to a faulty cable or jack that is injecting noise or gaps into the stream. If there is no problem playing back other types of audio, then the problem is network related.

Why does my record sound choppy?

Dirty Stylus/Needle



Perhaps the most common and easily fixed cause of why a record player or turntable might sound distorted is a dirty stylus. The needle (more accurately known as a stylus) is the tiny diamond tip that tracks the record groove.



Why does my new record player sound scratchy?

Dirt and static electricity may cause good records to sound “scratchy”. A proper cleaning will remove dirt and static electricity from the vinyl. You may be very surprised to hear how good your records sound once cleaned.

How do you fix a distorted record?

Can you fix in a groove. Distortion. Well no you can't but the good news is that you can set yourself up to reduce it as much as possible first make sure that your cartridge is aligned properly.