Unwanted sound while recording Fender P Bass?



Asked by: Zach King

How do I stop my guitar from making noise when recording?





In any dead spaces maybe have a rest that's for stuff it'll remove that that noise that hiss or that hump now depending on how loud it is if you have really loud hum.

Why does my bass sound weird?

Distortion on your electric bass can be caused by your amplifier, wiring, cable, EQ, pedals, or audio interface. It can be done intentionally with pedals or unintentionally by many things.

How do I make my bass sound smoother?

Our first real bass tone fix is to pluck properly.

How do I record clear bass?

One of the best things you can do with a DI is split the signal. So that you're actually getting the line from the DI. And the Mike sound from the amp.

Why is there a hiss when I record?





If you’re using a certain kind of microphone into a certain kind of interface or digital recorder you might be hearing some level of hiss underneath your recordings. If so, the type of microphone you’re using will likely be what’s known as a “dynamic” mic. This term refers to how the mic is built, and how it functions.

Why is there so much white noise when I record?

There a handful of reasons that a microphone will emit static sounds. The most common problem is that the gain, which is basically the mic’s sensitivity, is set too high on your amp or audio interface. However, ambient sound, bad cable connections, and moving air are also common culprits.

Why does my bass sound tinny?

It’s normal for brand new strings, just play it more, and the “tinny” sound will disappear. You’re probably just used to the sound of your old, dead strings. with brand new strings.. this would be a good time to try to learn slap bass

How do I make my bass sound cleaner?

And I find using both hands in tandem is the most practical way for bass player to mute our unused strings. So the first method I want to talk about is the floating thumb technique.

Why does my bass amp buzz?

More often than not, when your amp is making a humming sound, it’s caused by dirty power, a bad ground connection, or fluorescent lighting.



How do professionals record bass?

If you want to explore the different techniques for how to record bass guitar, check out the following tips.

  1. Direct into an audio interface. …
  2. Record direct through a preamp pedal. …
  3. The ol’ amp and mic trick. …
  4. Record bass amp and DI. …
  5. Keep your bass in good playing shape.


What level should you record bass at?

You should aim for peaks of -12dbfs and you should change your strings. If you want “brightness” and “attack” new strings are your friend. Also the output of a di is mic level, not instrument or line level, you can plug your bass straight into the instrument level jack without the di.



What is the best EQ setting for bass?

The Best Equalizer Setting For Bass. Bass exists between about 20Hz and 200Hz. Hz, or Hertz, measure audio frequencies, and are the common unit of measurement fused in all equalizers.

How do I remove mic hiss?

But I've got to put about 40 DBS of gain on to it to get a decent level because the mic is just. So far away from where I'm at I'm going to throw this right in the shot right now. But. I've also got a

How can I reduce the hissing of my speakers?

To remove humming or hissing sounds from speakers, identify if the problem is electrical or found in the speaker system, then tighten loose wires, fix ground loops, and move potential interferences away from the speaker. Smartphones, WiFi routers, and many other devices can make speakers buzz.

How do I fix hissing sound on my mic?

Turn down the gain on your windows gain like turn down the gain and windows and then turn up the gain on your microphone.



How do I get rid of static noise in my amp?

Anything that breaks the loop will remove the noise, and the easiest way to do it is to power everything through a single AC socket. As shown below, simply plug all your equipment into a single power strip, surge protector, or power center and plug that into the wall.

Why is my microphone making a buzzing noise?

If there’s a buzzing noise it is usually a loose connection or a faulty cable. If you’ve tried replacing the cable, but are still experiencing an unusual noise, it could be a faulty microphone that has been damaged internally. Look up the manufacturer’s warranty and see if you can get a replacement or get it fixed.