Sudden problem with first three frets, especially the high E string?



Asked by: Susanberry Lea

Why does my high E buzz on the high frets?





If the high E string is buzzing it can be caused by a number of things; the strings are tuned too low, wrong gauge strings, worn nut, incorrect neck relief, pick-up set too high, action too low, not fretting the string correctly, warped neck, strings wrapped the wrong way around the tuning head, one fret too high, or

Why do I keep breaking my high E string?

The main reasons why your guitar strings keep breaking on your electric guitar and your acoustic guitar listed in this article are: Old strings cause guitar strings to break. Bridge, nut, or tuning peg issues cause guitar strings to break. Your playing style can cause guitar strings to break.

Why does my high E string ring?

It’s due to the pick attack, which creates this subtle but high pitched ringing noise. It’s not string related as it happens on any string set.

Why does my high E sound weird?

It may be that it slipped out of the nut or that the groove in the nut is cut in too deep (a steel E string may cut itself deeper into the nut when tuning) or that the nut has cracked and the string slipped into the crack. Or the nut is displaced and the string action too low in consequence.

How do you fix a high E string buzzing?





If it’s just that high E on the first couple of frets, try slipping a thin piece of paper, or something between the string and the slot, then tune it back up. If the buzzing goes away, here’s another trick. Instead of replacing the nut, get a tiny bit of baking soda and super glue.

Why is my high E string so twangy?

Re: Why has my high E string become “twangy”



It is out of the equation when the string is fretted. It could be that the action is too low, because of a low saddle on the bridge or the neck is bent, so the string touches a fret when picked.

Why does my guitar sound different after changing strings?

For other guitarists who prefer a warmer tone, the metallic or tinny sound you get with new strings sounds bad. What is this? If you have just changed your guitar strings and you don’t like the metallic tone, don’t worry. As you play, your strings will break in and they will gradually lose the metallic sound.

How do you adjust a truss rod?


It's all very simple you turn the truss rod clockwise to tighten it and counterclockwise to loosen it what happens if you tighten it your neck and the trust wood will look like this.

How do I stop the sitar sound on my guitar?

It's of course important to say that you need the right gauge nut file for each and every string. This is how you tilt the file in the right direction for the knot. And the opposite.



How do you fix fret buzz on higher frets?

One of these frets is higher than the other. So when you press the fret next to it it buzzes on the tall fret.

Why are my frets buzzing?

Changes in humidity and temperature can commonly cause fret buzz. Fret buzz is a buzzing noise that occurs when the string vibrates against one or more of the frets. Sometimes you can experience fret buzz in the open position, and other times it could be specific strings and/or frets.

How do you fix a fret buzz?

5 Ways to Cut the Buzz



  1. Fret in the Right Place. Make sure you’re fretting notes at the proper spot just behind the fret. …
  2. Apply the Right Amount of Pressure. …
  3. Avoid Strumming Too Hard. …
  4. Consider the Strings. …
  5. Check the Setup.


Can too much relief cause fret buzz?

Incorrectly set relief (the bow your neck pulls into under string tension) can lead to fret buzz. At a high level, too much relief can be a cause of some buzz higher up the neck. Too little relief might cause some buzz all over if you don’t play lightly.

Why does my E string buzz on my guitar?

There you have it. Three common causes for fret buzz: (1) uneven frets (2) excessively low string action, and (3) a back bowed neck. Just one of these problems is enough to cause fret buzz, but often times a guitar has a combination of these three problems all at once.

How do I know if my truss rod needs adjusting?

If you think you have a truss rod problem, there’s only one check that will rule out all other factors: play every single fret on every single string with the guitar unplugged. If you hear buzzing, or if the fret fails to sound a note, then your guitar neck has bowed upward toward the strings.