Stringing an acoustic for down-tuning?



Asked by: Heather Olson

Can you tune down an acoustic guitar?





If you tuned down all you're doing is sometimes tuning all of them down relative to each other. So the example we're going to use right now is going to be tuning down to D. Standard.

Do you need thicker strings for lower tunings?

As we mentioned earlier, lower tunings like Drop D will work better with a set of heavier strings. It’s a good idea to use a 10-52 set in this tuning, which is often referred to as a “heavy bottom” set of strings because the string gauge is increased for the three lower strings.

What strings are best for drop A tuning?

It’s important to note that drop A tuning is rather extreme for a six-string guitar. As a result, to ensure you’ve got the most comfort in your playback, you should consider a thicker set of strings (. 012-. 056 gauge).

How do you tune A string down?

So you play your D string. And then you play your twelfth fret harmonic on your low E and drop that down to match the open D string. Now from there you can use a variety of methods you have your Lodi.

Is it bad to tune your guitar down?





No problem. The drop-d tuning only changes the total tension about four percent, so it will not do any damage to the guitar.

Should I tune my guitar half step down?

Tuning down a 1/2 step can be useful for many reasons. It can switch a song to a more desirable key for a singer. It also can change the tension of the strings and thus the tone of the guitar. As a result, you may find that you will need to tune down to be able to play along with the original recording of a song.

What strings are good for Drop D?

In Drop D tuning, you can play a D power chord as an open chord, playing only the lowest three strings (low D, A, and your higher octave D string). Although you’d only strum your three lowest-toned strings to play a D power chord in Drop D tuning, it still gives you a thick, bottom-heavy tone.

What string gauge is best for Drop C?

Guitar Strings

Tuning Fender Scale (25.5″) Gibson Scale (24 3/4″)
D Standard 11-54 (higher tension) 11-48 (normal tension)
C Standard 12-56 (regular tension) 12-56 (normal tension)
11-54 (loose feel)
Drop C 11-54 +56 (normal tension) 12-56 (normal tension)

What strings are best for drop B?

And quite often you'd even. Hear normal guitars aren't supposed to be that low you need a baritone guitar. But we see enough players using standard scale instruments to know that this isn't the case i



How do you get a drop tuning?

Dropped A tuning for a 6-string guitar is achieved by tuning all strings down a 4th with the lowest string tuned one additional step down to A E A D F# B. This is a “drop 1” tuning in the key of B, i.e. tune the whole guitar down a perfect fourth from standard tuning, then tune the 6th string a whole step down.

How do I tune my 2 step down?

C tuning is a type of guitar tuning. The strings of the guitar are tuned two whole steps lower than standard tuning. The resulting notes can be described most commonly as C-F-A♯-D♯-G-C or C-F-B♭-E♭-G-C. This is not to be confused with C♯ tuning, which is one and one half steps lower than standard tuning.

How do you tune an acoustic guitar down a whole step?

Right now I've tuned down a whole step my e becomes d. My a string becomes G my D string becomes C IJ string becomes F Lee string because at a my e-string becomes a D.



Should you tune down a 12 string?

While you don’t have to tune a 12-string guitar down, there are many 12 string songs that do use lower tunings. Tuning your guitar down will let you play those songs properly.

Why do some guitarists tune down a half step?

Guitarists tune their guitar half-step down for many reasons. The most compelling one is probably to favor the vocal performance by transposing songs into a lower key, making it easier on the singer. But other reasons might include a heavier sound, lower string tension, and easier chord voicings in some keys.

What tuning is Dgcfad?

This guitar tuning is known as D Standard. This tuning moves ALL the strings on your guitar down a whole step, so the bottom E string (and the top E string) become D, the A becomes a G, the D a C, and so on. This makes the overall sound of your guitar lower, darker, and, in the parlance of metal, heavier.

What tuning did Pantera use?

For the most part, the band’s guitarist Dimebag Darrell and bassist Rex Brown tune to E standard. This, however, changed over time as they started using drop D and other tunings. And, with some of their later albums, they even started using “in-between” tunings. In short, they didn’t care for the A440 standard.



What tuning is Dadgbe?

Drop D tuning is an alternative form of guitar tuning in which the lowest (sixth) string is tuned down from the usual E of standard tuning by one whole step to D. So where standard tuning is E2A2D3G3B3E4 (EADGBe), drop D is D2A2D3G3B3E4 (DADGBe).