Should I keep dBFS level on vocals relatively same?



Asked by: Shane Pierce

Audio with the same dBFS measurement can sound louder or softer depending on the waveform. So, when you’re trying to balance one signal with another in an ear-pleasing way, dBFS isn’t the unit you should be using; dBu (relative to some standard level) would probably be the way to go.

What dB should my vocals be at?





-18dB

What dB should vocals be recorded at? You should record vocals at an average of -18dB for 24-bit resolution. The loudest parts of the recording should peak at -10dB and be lowest at -24dB. This is to keep an even balance on the level of the vocals without distortion.

What dB should vocals and beat be in a mix?

Thus, it is best to record vocal renditions with an average of -18 dB, assuming you are using the standard definition 24-bit. However, louder parts such as screams or breakdowns should be -10dB. This works the other way around – the loudest and quietest recordings should be at least -24 dB.

How much louder should vocals be than the beat?

Vocals should be -18 dB when recorded at the standard 24-bit resolution; louder parts of the track can be recorded at around -10 dB. The vocals and the beat need to be evenly balanced.

Should you add saturation to vocals?





Should you use saturation on your vocals? Most probably, yes. Saturation on your vocals will help them to cut through the mix, as well as add pleasant warmth and even grit. But creating stunning vocals is just part of the mixing battle.

How many DB should a mastered song be?

How loud should your master be? Shoot for about -23 LUFS for a mix, or -6db on an analog meter. For mastering, -14 LUFS is the best level for streaming, as it will fit the loudness targets for the majority of streaming sources, but it’s okay to go louder (-7 to -10) so that your music stacks up well on other mediums.

Should 808 be louder than vocals?

Just make it loud in the context of the mix. Especially in hip hop, kick drums like the 808 tend to be the loudest instrument in a mix. Instead of dressing up an 808 with half-a-dozen signal processors, just try making it louder than the other instruments.

Why don’t my vocals sound professional?

If your vocal is dynamic in volume, the compressor may have to work hard to level things out. When a compressor is working too hard, it can cause your vocal to sound “squashed.” If this is the case, you may need to ride the volume of your vocal to reduce the amount of hard peaks in volume.

How do you balance vocals in a mix?

Balance is very important when sitting vocals in a mix. You have to get the balance of the vocal and not take away from the song. Ensure the vocal is cutting through by having your volume down; you want to hear the vocals balanced with the music and not detached.



Should I use saturation on every track?

That said, don’t marry the idea of saturation on every track. If it’s not making your mix sound any better, no matter how much you tweak the plug-in, just trash the idea and move on! Saturation can give you some interesting textures but it can also make your instruments duller.

When should I use saturation?

Saturation can be used during mixing to thicken up the sound of a signal or even as a creative effect (like a distorted telephone vocal, for instance). Saturation is great for capturing a certain vibe, like using tube and tape saturation to give your mix a classic sound.

How can I get my vocals thicker?

How to Thicken Your Lead Vocal



  1. Create up to 4 additional voices with the Wave Stereo Doubler.
  2. Subtly increase the quieter aspects of your vocal with a low level compressor.
  3. Create a concise reverb with quick reflections and a short reverb time.


Why do my vocals sound so thin?

In fact, thin mixes usually come from a poor arrangement. But sometimes they can come from a poor use of EQ, too. When you prevent and address thinness in your track, you can produce a mix that’s more powerful and impactful. You never want an important chorus to sound thin – the music will lose it’s impact.

How do I make my vocals brighter?

Making a vocal brighter includes affecting the high-frequency range in one way or another including using an EQ, an Airband EQ, an exciter, saturator, or other various techniques. Using certain types of reverb can also create a bright vocal if the reflections are in the high-frequency range.

How do I make my voice more punchy?

10 Ways to Make Vocals Sound Modern & Professional



  1. Top-End Boost. …
  2. Use a De’Esser. …
  3. Remove Resonances. …
  4. Control the Dynamics with Automation. …
  5. Catch the Peaks with a Limiter. …
  6. Use Multiband Compression. …
  7. Enhance the Highs with Saturation. …
  8. Use Delays Instead of Reverb.

How much compression should I use on vocals?

A good place to start with pop vocals is a 5:1 ratio. Try a higher ratio (7:1, 8:1) for more heavily compressed vocals with minimal dynamic range, or a lower ratio (2:1, 3:1) for a more natural sound with some dynamics preserved.

Should I pan vocal doubles?

Don’t Always Pan Your Vocal Double



Once the tracking is complete and a song is ready to be mixed, panning tends to be a common approach for vocal doubles. The method is pretty self-explanatory and involves panning one vocal hard left and the other hard right. Double tracking these vocals like it’s going out of style.