Shaky electric guitar sound?



Asked by: Andrea Chang

Why does my electric guitar sound shaky?





As mentioned above, the most common cause of string warble on electric guitars is a pickup or multiple pickups that are adjusted to be too close to the guitar strings. While adjusting the pickups close to the strings may seem like it would produce and fuller and higher output, too close has much the opposite effect.

How can I make my electric guitar sound smoother?


Long cables you know what i mean what are you going to be walking out into the crowd 25 feet 50 feet right no probably not keep your cables as short as possible to really help your overall tone.

Why does my electric guitar sound twangy?

If your guitar sounds tinny with a bit of twang of buzzing, it may be due to the strings vibrating against the frets as you play. It’s possible for your guitar to sound tinny on only certain parts of the fretboard or strings, or across the entire fretboard.

Why does my electric guitar crackle?

Loose jacks



On electric guitars, you do a lot of plugging and unplugging of your cable, and these actions can eventually loosen the output jack, causing a crackling sound through the speaker. This crackling indicates a disconnected ground wire.

Why does my guitar make a rattling sound?





Rattle occurs when vibrating strings make contact with the frets. The vibrations interfere with the string oscillation and lead to an impure sound. The energy in the string is partially absorbed by the rattle which leads to a quicker decay of the tone.

How do I stop my guitar from rattling?

5 Ways to Cut the Buzz

  1. Fret in the Right Place. Make sure you’re fretting notes at the proper spot just behind the fret. …
  2. Apply the Right Amount of Pressure. …
  3. Avoid Strumming Too Hard. …
  4. Consider the Strings. …
  5. Check the Setup.


Can cheap electric guitar sound good?

Having a cheap electric guitar doesn’t mean it has to sound it. There are plenty of ways you can make your guitar sound loads better, and without spending much. So if you’re a new player, or just don’t want to buy a new guitar, then keep reading to find out how to get the best out of your instrument!

How can I make my electric guitar sound like rock?

So in order to keep the volume the same and just change the sound we're going to turn down the master. Volume. You notice now that it's breaking up all the driving and distorting.



How can I make my electric guitar sound warmer?

Like the particular tone I have here. I would call warm tone because I'm using a chorus effect I'm using reverb. You can also use delay like in this one. As you can hear the echo right.

Why does my amp keep making a crackling sound?

Random Crackling and Pops



This typically signifies your amplifier has faulty power tubes. First, try swapping them one by one with a spare tube. If this does not fix it, then the preamp plate and/or cathode resistor need to be checked out (this is probably something to get a professional tech to do).

How do I get rid of static sound in my amp?

Purchase a noise suppressor pedal.



  1. Turn the noise reduction knob clockwise to reduce the ambient sound and feedback from the guitar.
  2. Play with the threshold knob until you do not hear static from your amp. You have to find the level for your specific guitar and amp.


Why is my guitar amp popping?

Guitar amp pops when you turn it on (or off) because high voltage energy is released from the power supply every time you power up (or down) the amp. These surges in power can produce a pop noise as they release energy. It’s always a possibility that these surges will produce a pop noise.

How do I know when to change my tubes in my amp?

A: These are the most common signs that tubes need replacement:

  1. Excessive noise (hiss, hum) including squealing or microphonic tubes.
  2. Loss of high end. …
  3. A muddy bottom end; Sounds like there is too much bass and note clarity is lost.
  4. Erratic changes in the overall volume. …
  5. The amp doesn’t work!




What does a bad preamp tube sound like?

A bad preamp tube will become very noisy and produce hiss, crackle, and pop sounds, or create volume drops or loss. In some rare conditions, the tube can also lose its vacuum and fail completely. Bad preamp tube symptoms can lead you to the faulty one if you know what to look for.

How do I know if my guitar amp is blown?

The most common aural indication of a blown speaker is an unpleasant buzzing or scratching sound, by itself or roughly at the pitch of the note the speaker is attempting to reproduce. Or there could be no sound at all.