Send pre-fx signal of a track to the return track in Ableton?



Asked by: Nicole Milose

1 Answer

  1. Set the Audio From i.e. input to be your original track that has the effects.
  2. Set the Audio From as Pre FX.
  3. Set Audio To to Sends Only, so that it doesn’t contribute to the main mix.
  4. In Sends, dial in the amount of effect send you want.

How do you use send and return tracks Ableton?






We have two return tracks on the first one we have by default loaded the reverb. And on the second the delay probably the most used effects for return tracks.

How do you send a track to a send in Ableton?

And then have the affected audio sent back into the mixer. So let's take a look at how you can do this in Ableton Live first you're going to want to go ahead and right click and then select insert.

How do you send a group return in Ableton?

So in order to do that we need to create a return track that's going to be our. Group return track so i'll give it a name just using rename. Now. And then we need to route. All of these.

How do return tracks work in Ableton?

Start the beat playing (click the Launch button), then grab the Send B control and raise that slowly, and you’ll hear the Reverb begin to work on the beat. 6. And that’s how to use a return track.

What is difference between send and return tracks?





Assign the send to an available bus and then route the bus to an aux track. The path a signal takes on the way from a bus to an aux track is called a return.

What are send return effects?

What are sends and returns? Sends and Returns let you run multiple sounds through the same effect in your mix. No more putting a reverb on every different channel and trying to duplicate the settings knob-by-knob. Each Return channel in your DAW allows you to set up an effect on a separate channel.

How do you send a send to another Send in Ableton?

So basically a send is this little option here where you're taking this original signal and sending it to the return track and the return track is where you can put on audio effects.

What are buses and sends?

A buss as you say, can send a signal (normally to the Master buss) from internal channel inputs. A send normally are used to send signals to external devices ( ie.. compressors, eq, etc.)

How do you send a bus in Ableton?

It's this simple I right-click somewhere insert audio track or just Apple T whatever you want to do.



How do I link tracks in Ableton?

Selected tracks can be linked by using the Link Tracks command in the right-click (Win) / CTRL – click (Mac) context menu. The Link Tracks Command. To link tracks in a Group Track (see 16.3), open the Group Track header’s right-click (Win) / CTRL – click (Mac) context menu and use the Link Tracks command.

How many returns can you have in Ableton?

Ableton provides users with a maximum of 12 return tracks. Unfortunately, some projects require more than that. A single vocal may be using up 4 return tracks alone (dedicated reverb, delay, saturation, etc.). Ableton allows you to work around this issue with the use of audio effect racks.

How do you send a reverb to a bus in Ableton?

So we made a a and Ableton specifically the way you send to your bus is through your sins so a goes to a B goes to B and you can send the amount with the little dial.



How do you send an auxiliary return?

Turn up the aux master to unity. Now for every channel that needs to have an effect on it turn out the aux end add more reverb.

How do you send a reverb track in Ableton?

So to do that inside of Ableton Live for example we can right click and insert return track or ctrl alt T.

How do I make a bus track in Ableton?

Or you can just click command G. So now this group acts as a bus and controls everything under it. So if I solo individual tracks. You'll hear one track if I solo the group.

How do sends work in Ableton?

You always want to set it to 100% wet the reason for that is that now the send knobs on the individual tracks are taking over the responsibility of balancing between the dry and wet audio.



What is grouping and bussing?

A bus is a path for the audio to get somewhere. Grouping just links certain DAW functions together.