Recording with both a Multi-Effects Pedal and a Modelling Amplifier at the same time?



Asked by: Megan Evans

Can you use a multi effects pedal with an amp?





Two connects the effects end of your multi effects into the input of your amplifier. Cable. Three goes from the amplifiers. Effects end to the effects return of the multi effects unit and cable.

Can you use effect pedals with an audio interface?

no, you can’t. The inputs on the interface are for audio only. You need a dedicated expression pedal input.

How do I connect my Zoom pedal to my amp?

How to Connect Effects Pedals to your Amp and Guitar

  1. Make sure your amp is turned off.
  2. Connect your guitar cable to your guitar.
  3. Then plug the other end into the “input” side of your pedal.
  4. Plug another guitar cable into the “output” side of your pedal.
  5. Then plug the other end into the “input” on your amp.


What is Hotone Ampero?





Product Description. The Hotone Ampero Amp Modeler / Effects Processor is a game changer! It’s heart pounding amp modeling and uber-quality effects are powered by the new-gen, dual-DSP CDCM HD (Comprehensive Dynamic Circuit Modeling High Definition) & F.I.R.E. (Field Impulse Response Enhancement) system.

How do you connect guitar effects pedals and amps?

Plug your guitar into the ‘input’ jack of your pedal. Then plug the other cable into the output jack of the pedal. This cable then connects to the input on your guitar amp. Most amps have the guitar input on the front, while others have the input on the top or back.

Where should multi-effects pedal go?

Typically, most players will find that compression, boost, and dirt pedals are best suited to being first in the signal chain, or perhaps second, right after a wah or tuner (both pedals that may be easily replaced by a multi-effect, by the way). This is a good place to start, as it produces very dependable results.

Can you mix analog and digital pedals?

You can mix the two, the thing is that Boss pedals usually lack tone with their digitalness (won’t go into detail) and anyways, if you have a really nice analog pedal chances are you might not want to run it through digital, because the other pedal might suck it’s tone, and it’s true with analog and analog, you can

How do I connect multiple effects to audio interface?

One patch cable connects the output of the preamp to the input of the effects processor. The other patch cable connects the output of the effects processor to one of the align.



Can you run line level through guitar pedals?

Are there any guitar pedals that can handle line level? A: Yes. There are several that can, such as the TC Electronic TonePrint series of pedals, which were designed to have plenty of headroom for line-level signals. Other TC pedals, such as the Nova Repeater can also work with line level.

How do I connect my amp to Hotone Ampero?

Plug your instrument into the Ampero instrument IN jack, and run a cable (or two) from the unbalanced OUT to your amplifier(s). If you have one amp, run the cable from the left output. For best results, turn off the AMP and CAB modules on Ampero.