Recording hard rock guitar riffs with a mic?



Asked by: Emily Martin

Can you record guitar with microphone?





The industry standard guitar microphone. Actually just industry standard in many different ways these are used on drums. On vocals so the way a dynamic mic works like the 57.

How do you record a rock hard guitar?

Recording Metal Guitar at Home

  1. Have your guitar set up. …
  2. Choose the right amp for recording metal guitar tones. …
  3. Cab/speaker choice (or IRs) matters. …
  4. Use less gain than you’d think. …
  5. Boost with an overdrive. …
  6. Dial the tone in context. …
  7. Double or quadruple track rhythms. …
  8. Use something to dampen the strings.

Is it better to record guitar with a mic or interface?

Electronics within acoustic guitars (whether pickups or microphones) don’t capture the sound the way that we’re used to hearing it; the familiar sound of an acoustic guitar that we all know and love is the sound from outside of the instrument. So if you’re looking for a natural sound, a microphone is the way to go.

How do you record a heavy guitar tone?

10 Tips for Recording Metal Guitars that Sound Monstrous

  1. Use Less Gain. …
  2. Clarity & Mid Range. …
  3. Nail the Raw Guitar & Amp Tone First. …
  4. Dial-in Your Tone in the Context of a Full Band Mix. …
  5. Layer Tracks of Guitar. …
  6. Experiment With Microphone Combinations. …
  7. Test Your Speaker Cones. …
  8. Mic Placement Plays a Huge Part in Tone.

How do you record a distorted guitar with a mic?





Place microphone one in front of one of your amp speakers. Then get a second microphone and position in front of another one of the speakers. For distorted guitar, it is probably best that both of these microphones are dynamic microphones but they don’t both have to be Shure SM57’s.

How do you make a heavy metal guitar sound?

It the mids are scooped too much if you know what a scoop mids means it means when the bass and treble is all the way up and that the middle is taken all the way down and give it like a scoop EQ.

How do professionals record guitar?

But if you just want to learn about recording guitar specifically, keep reading.

  1. Tip 1 – Use a Cardioid Dynamic Microphone. …
  2. Tip 2 – Position the Microphone Close to the Amp. …
  3. Tip 3 – Find the Right Tone on the Amp. …
  4. Tip 4 – Adjust the Position to Adjust the Tone. …
  5. Tip 5 – Find the Tone in the Context of the Mix.

How do you record a thick guitar?

So we need some imperfections. Between the two takes. So that's why I had the guitar player playing the same riff again. And record the same riff.

How do I make my guitar sound fuller?

11 Tips To Make Guitars Sound Bigger In A Mix



  1. 1 Use less gain. …
  2. 2 Be careful layering guitars. …
  3. 3 Combine single note parts. …
  4. 4 Add extra parts with different sounds. …
  5. 5 Make creative use of automation. …
  6. 6 Use buss processing on the guitars. …
  7. 7 Stay away from the solo button. …
  8. 8 Let the bass provide the bass.

How do you EQ rock guitars?

Just using the EQ here on the SSL not using any compression. Full-disclosure they both have a high-pass filter that will kick on and they both have a cut at 450 Hertz to clean them up a little bit.

How do you make a guitar sound crunchy?

The first way to achieve a crunch tone is by pushing the amp with pedals. A boost pedal does just what the name implies. It boosts the signal coming from the guitar. When your amplifier gets this super hot signal from your guitar it starts to clip.

How loud should my amp be when I record?

well, what you really want to do is have it loud enough so that the microphone hears the tone you want to record. There’s not much sense in choosing your tone based on how it sounds “in the room” if you’re miking your amp at a distance of only a few inches from the speaker.



What dB to record guitars at?

What is this? Recording guitar at around -14 dB is a good starting point. The most important point to keep in mind is to avoid clipping. Recording guitar at around -14 dB should avoid clipping, but you may need to raise or lower your level depending on your style of playing.

How many dB is a guitar amp?

How loud is a guitar amp in decibels? Most guitar amps are around 115 dB if you’re located a meter (or 3.28 feet) away from the speaker/cabinet. However, if you’re standing right next to the speaker of a fully distorted 700W head with a 4×12 cabinet, it’s about 135 dB.