Piano tuning- tuning pin is far too small for tuning lever?

Asked by: Walter Phillips

Are all piano tuning pegs the same size?

Tuning pins also come in several different diameters, but virtually all modern pianos use a Standard No. 2 pin.

Are all piano tuning wrenches the same?

Tuning wrench sockets may be triangular-shaped or eight-pointed star-shaped, and are found in two basic sizes: a large size for pianos, and a smaller size for most other instruments. For pianos, pins are typically square with a slight taper. There are three standard sizes known as No. 1, No.

What size is a piano tuning wrench?

a 6,5MM DIAMETER tuning pin is the most common.

Are all piano tuning hammers the same size?

The tips are available in different sizes. The #2 size tip is the most common and will fit piano tuning pins on almost all pianos. The #1 size tip is a little smaller and is designed to fit tuning pins that are extremely small.

Can I use a socket wrench to tune a piano?

Something like will do the job for most pianos, although different Pianos have different sized tuning pins (especially older ones) so you may struggle to get a good fit without spending a lot on a more professional kit. DO NOT try and use a socket wrench, it will permanently damage the tuning pins.

Can you tune a piano without tools?

It’s impossible to tune a piano without a few basic, specialized tools. At minimum, you will need to purchase three things: Tuning lever. Electronic chromatic tuner.

Are piano tuning pins threaded?

The tuning pins are threaded to stay inside the pinblock, and are drilled at a 3-4% angle to keep tension. There are several lengths and circumferences of pins. A new piano uses #0 or #1 pins (skinniest), and the size number system goes up to #7 pins.

What are piano tuning pins made of?


Convention tuning pins for pianos are about 2.5″ (6.35 cm), long are made of steel, and are generally cylindrical in form, but have flats about 0.63″ (1.6 cm) long of tapering width on four sides near the upper end to permit engagement with a standard tuning lever, which has a socket tapered to fit the flats.

How do you use a piano tuning hammer?

Anyways I do this rocking jerking motion I can feel when the when the tuning pin actually moves in the block okay and that takes a little bit of practice to be able to to get to feel that.

What is a piano tuning hammer?

About this item: PROFESSIONAL TUNING HAMMER: It has the threaded end on it so that you can remove the head and change to a different head and tip combination. Designed with a star-shaped head, which allows for universal use across piano tuning pins

How long does it take to tune a piano?

A qualified technician can tune a piano in less than 1.5 hours. An appointment to tune your piano is expected to be around 2 hours to allow for unforseen repairs or adjustments and a little banter with you, the piano owner. Pianos that are very flat or very sharp need what we call a pitch correction.

Can you learn to tune a piano?

In recent times, there have been a few places that offer courses online. Resources you might want to check out, if you want to learn piano tuning professionally, include the Piano Technician Academy, as well as the Randy Potter School of Piano Technology.

Why is it so hard to tune a piano?

Piano strings hold much more tension than guitar strings, so stabalizing the pitch takes more nuance than just turning the tuning pin. Strings can break if you are inexperienced, and replacing them requires additional parts and expertise.

What do you call a person who tunes pianos?

Also Called. Piano Technician, Piano Tech. Piano tuners make small adjustments to the tension of a piano’s strings, aligning the intervals between their tones so that the instrument is in tune. Some piano tuners are also piano technicians, providing repair and restoration services.

Should I tip a piano tuner?

Tipping piano tuners isn’t customary. If you had a great experience with a piano tuner, you can also show your appreciation by leaving a review on Thumbtack.

How much does the average piano tuning cost?

$65 to $225

The average price to tune a piano ranges from $65 to $225, and the cost can increase by several hundred dollars if the piano requires multiple tuning sessions or repairs.

How much is a winter piano worth?

An unrestored Winter piano is worth somewhere between $500 to $1,000. Once restored, some Winter pianos can reach up to $20,000.