Music Equalizer Advice?



Asked by: Custom Milkie

The Best Equalizer Settings For Music (The Real Answer)

  • 2000 Hz: The upper mid-range is the region of most instruments and vocals. …
  • 3000 Hz: This is the presence range. …
  • 5000 Hz: This is where the high-end frequencies begin. …
  • 10 000 – 20 000 Hz: The extremely high-end range is the higher limit of human ears.

What is the best equalizer settings for music?





The Best Equalizer Settings For Music (The Real Answer)

  • 2000 Hz: The upper mid-range is the region of most instruments and vocals. …
  • 3000 Hz: This is the presence range. …
  • 5000 Hz: This is where the high-end frequencies begin. …
  • 10 000 – 20 000 Hz: The extremely high-end range is the higher limit of human ears.

What is the right way to EQ?


Positive gain values indicate a boost while negative ones make it a cut frequency the frequency is the center of your EQ bands action this control determines the range where booster cuts will occur.

How do you use an equalizer for music?

To use a graphic equalizer, push the sliders up above the horizontal line to boost sounds within that frequency range. Similarly, push the sliders below the horizontal line to cut the sounds in that frequency range. For instance, if you want to turn up the bass in a song, push the lowest kilohertz slider upward.

Does EQ make music sound better?

An equalizer lets you boost bass, tweak treble, and more to tune your audio to taste.

Where is the perfect equalizer setting?





Normally, you’ll find whichever EQ point is closest to the frequency you want to boost or reduce, and then simply move it to the exact spot you’d like for the desired effect. Turning the boost or gain knob up or down determines how much you are boosting (or reducing) your chosen frequency in decibels.

What should equalizer settings look like?

60 Hz to 200 Hz: Low frequencies requiring a bass or lower drums to be reproduced. 200 Hz to 600 Hz: Low mid-range frequencies. If you play the lower end of many musical instruments such as guitars or a piano you’ll hear this range of frequencies. 600 Hz – 3,000 Hz: Mid-range frequencies.

How do you master EQ?

Let’s look at top ten tips for applying equalization during mastering:

  1. Use an Accurate Monitoring System in an Acoustically Tuned Room. …
  2. Understand the Basics. …
  3. Use EQ in Its Proper Place. …
  4. Cut, Don’t Boost. …
  5. Less Is More. …
  6. Correct the Tonal Balance.


Should you EQ everything?

You should not EQ every track in your mix automatically. Each track should be listened to on its own merits, and if it requires some EQ to sit in the mix well, then apply some to that track. If a track sits well in the mix without any EQ, then do not apply any.



Should treble be higher than bass?

Bass and treble are the exact opposites of each other. While bass is on the lower end of the frequency range, treble is on the higher end. Many audio devices have an ‘extra bass option’, which basically lets you hear lower frequency sounds more prominently.

How can I make my music sound sharper?

How to Make Your Music Sound Better

  1. Begin with good writing and structure. …
  2. Know what a song that “sounds good” actually sounds like. …
  3. Take stock of your talents. …
  4. Collaborate. …
  5. Be clear on the genre you’re working in and its main components. …
  6. Trust your work to the professionals. …
  7. Keep working on your own skills.

How do you use an equalizer for beginners?

Yes you can always use a parametric bell to get a little bit more out of your kick drum in the low end I think that's a positive use of it.



How do you make music sound amazing?

Another huge element to making music sound more realistic is panning. Sure panning is used a lot when trying to fit everything into a mix. But pay attention to the usual location of each instrument.

Do equalizers affect sound quality?

Yes. It will reduce the quality of a good source, and you should be able to hear the difference in a high transparency rig. The benefits of equalizing may outweigh the downside of loss of transparency for some kinds of music, including the live tapings that you describe, which aren’t exactly high quality.

What makes a rhythm sound good?

Strong beats and weak beats: Rhythm combines strong beats and weak beats. Strong beats include the first beat of each measure (the downbeat), as well as other heavily accented beats. Both popular music and classical music combine strong beats and weak beats to create memorable rhythmic patterns.

What makes a sound sound good?

There are objective standards that define sound quality: Low distortion, wide frequency response, and uninhibited dynamic range. Those are hardware-oriented standards, but they still apply to recordings to some degree.



What makes music bad?

It’s got to be something that people really know to be a contender for worst song ever and has to be a song that has some lyric element that is bad. It has to be just either trite, obvious lyrics, something that’s offensive or something that just is overly maudlin or sentimental in its lyrics.

How do you know if music is good?

To understand wether or not your music is good, let’s cover 8 habits you might be guilty of.

  1. Over-Compression. …
  2. Steep EQ Curves – Especially on the Low End. …
  3. Unimportant Sounds. …
  4. Unnecessary Layers. …
  5. Not Writing the “Song” First. …
  6. Inserting Time FX Plugins. …
  7. Falling in Love with Bad Samples. …
  8. Only Listening in your Studio.