Microphone positioning to record acoustic guitar & singing with a single mic?

Asked by: Don Kaminsky

Start by placing one microphone around the 12th/14th fret and the other at the bridge pointing either at the body or towards the sound hole, 6 – 12 inches away. Adjust each mic so that they sound good on their own. When mixing the guitar sound, often each mic will be panned hard left and hard right.

Where do you place the microphone on an acoustic guitar?

Mic Stuff: 7 Critical Tips on How to Mic an Acoustic Guitar

  1. Do not place the microphone directly in front of the sound hole. …
  2. For a balanced sound that captures high end, place the mic about 12 to 16 inches away from the 12th fret.

How do I record my acoustic guitar perfectly?

Top Ten Tips for a Great Acoustic Guitar Recording

  1. Use a condenser microphone. …
  2. Avoid too much bass. …
  3. Be aware of the sweet spot. …
  4. Use New Strings. …
  5. Record Direct. …
  6. First Fret Brilliance. …
  7. Record in Stereo. …
  8. Double-track with different mic techniques.

What is the 3 to 1 rule in microphone placement?

This rule deals with minimizing the audible phasing problems when summing several microphones to mono. The rule states that the source-to-microphone distance of numerous microphones should be three times the distance between the sound source and the nearest microphone.

How far should condenser mic be from guitar?

approximately 6″ to 12″ inches away

So let’s dive into the three most common stereo techniques for recording acoustic guitar. While you should always experiment with placement and mic choice, generally speaking you will want to use a pair of unidirectional condenser mics placed close to the instrument (approximately 6″ to 12″ inches away).

What level should you record acoustic guitar at?

As a general rule, guitars should be recorded at an average level of about -18dB. It is acceptable for peaks to go up to around -15dB. Clipping should always be avoided.

Should you double track acoustic guitar?

Doubling acoustic guitars produces a lush, full sound that adds texture and density to your mix. Try using a capo on the double so you have a higher inversion and a more complex chord voicing. Also try a different guitar, like a smaller body or a different tuning, even a 12-string or Nashville-tuned guitar.

How do you record guitar clearly?

But if you just want to learn about recording guitar specifically, keep reading.

  1. Tip 1 – Use a Cardioid Dynamic Microphone. …
  2. Tip 2 – Position the Microphone Close to the Amp. …
  3. Tip 3 – Find the Right Tone on the Amp. …
  4. Tip 4 – Adjust the Position to Adjust the Tone. …
  5. Tip 5 – Find the Tone in the Context of the Mix.

How do I record my guitar with a microphone?

The first and most important thing to look out for is phase when you're using two microphones on the same source in this case the speaker. The diaphragms of the microphone.

Should I record acoustic guitar in mono or stereo?


Stereo Might the Better Choice

First of all, you are able to record the entire instrument instead of just a small portion of the guitar. Different parts of the guitar have different tonal characteristics and the more of these that you capture in the recording, the truer to the instrument it will sound.

How can I record my acoustic guitar without background noise?

Other ways to eliminate background noise while recording acoustic guitar

  1. Close the door.
  2. Record during the day.
  3. Rent an office/studio.
  4. Use sound-absorbing material.
  5. Use noise gates.

Can you record acoustic guitar with condenser mic?

Skills if the the original source instrument doesn't sound good to begin with you're going to have a hard time getting a good result out of it next up is the microphone.

Is condenser mic good for acoustic guitar?


The Rode M5 Condenser Microphones (Matched Pair) provide exceptional quality recordings for a low price. These are some of the best acoustic guitar mics because it allows you to capture full stereo sound sources without taking up too much room.

What kind of mic do I need to record acoustic guitar?

Recording acoustic guitars is a beautiful art that is easy with the right tools. While you can still get a good recording out of a standard SM57 mic, it’s worth investing in a nice condenser or ribbon mic for a bit of extra character.

What is the best microphone for amplifying an acoustic guitar?

Here Are the Best Microphones for Acoustic Guitars

  1. Shure SM81-LC (Best Overall) …
  2. Rode NT1KIT Cardioid Condenser Microphone (Best Value) …
  3. AKG Pro Audio P420 (Best Under $200) …
  4. Shure SM-57 (Best Under $100) …
  5. Shure BETA 58A Dynamic Vocal Microphone. …
  6. Audio-Technica AT2020 Cardioid Condenser Mic.

Is Shure SM57 good for acoustic guitar?

The Shure SM57 is a very capable microphone for recording an acoustic guitar. Its ability to eliminate unwanted noise make it a good choice to capture the acoustic guitar’s clarity and detail. Condenser microphones are the best option for acoustic guitar, but with care an SM57 can work well.

How do I record acoustic guitar with Shure SM57?

And then moving over so you can hear from the body itself. And then moving over to the neck. So you can kind of hear the three of the kind of main ways to pick up an acoustic.

Do you need a pop filter for recording guitar?

Well, the answer to this is no you do not need a pop filter when recording a guitar. In fact, it is likely that the only time you will need a pop filter in your home studio is when recording vocals.