Loop pedal volume in effects loop not controlled by amp volume controls?

Asked by: John Cameron

Can you use a volume pedal in an effects loop?


Placing your pedal in the effect loop of your amp means it no longer functions like a foot-controlled guitar volume. With gain in play on your pedalboard, the volume pedal now acts as a level control. You’ll have the same amount of gain no matter how you set the level with the volume pedal.

Can you use a loop pedal without an amp?

In theory, yes you can. Some high-end loop pedals have dedicated headphone outputs for this purpose. However, plugging headphones into a normal output is not recommended.

Where does volume pedal go in FX loop?

Now with the volume pedal right at the very end of the trail.

Can you use a loop pedal with any amp?

Of course you can. It runs just like a normal pedal. You dont have to have an effects loop for anything. Some pedals sound better in the effects loop.

How do you set volume on pedals?

I wanted to take some time today to talk to you about setting volumes throughout your whole effects chain how pedals will work with each other when stacked.

What is the difference between a volume pedal and an expression pedal?

In a nutshell, a volume pedal acts as a master volume control, only affecting the overall volume of your guitar signal. An expression pedal can control various different effects parameters depending on what device they are hooked up to. For example, they can alter the length of a delay, or add and remove gain.

How do you hook up a looper pedal to an amp?

How to Connect Effects Pedals to your Amp and Guitar

  1. Make sure your amp is turned off.
  2. Connect your guitar cable to your guitar.
  3. Then plug the other end into the “input” side of your pedal.
  4. Plug another guitar cable into the “output” side of your pedal.
  5. Then plug the other end into the “input” on your amp.

Do all amps have effects loop?

Some amps don’t even have an effects loop and this is generally because they are pedal platform amps. These amps are generally single channel and won’t have distortion on-board.

Can you plug a microphone into a looper pedal?

So we're gonna plug this end in to the microphone. And then the microphone is gonna go into our looper pedal so we're gonna plug this into the XLR input on the boss. RC.

Can you use a looper pedal with spark amp?

With the AIRSTEP and your Smart Device, you can finally get a REAL looper for your Spark Amp! In the video, the AIRSTEP Foot controller is set to switch channels of Spark and toggle recording of the Looper App.

Can I use looper pedal on acoustic guitar?

Can you use a loop pedal with an acoustic guitar? A loop pedal can be used with an acoustic guitar. Many loopers have an XLR input for a microphone, so you point the mic at the guitar, plug the mic into the pedal, then plug the pedal into either an amp or an audio interface.

How do you set volumes?

Tap Press Power & Volume Up together. Choose what happens: Vibrate: Phone calls and notifications vibrate. Mute: Phone calls and notifications are silent.

Do nothing

  1. Press a volume button.
  2. At the right, tap the Down arrow .
  3. Choose the volume type: Media (music, videos, games, other media) Ring (calls, notifications) Alarm.

How do volume pedals work?

If you're using the distortion on your amp it means that you could actually put the volume as the first thing in your effects. Loop if your amp has an effects loop. So you put the volume pedal.

How do you overdrive a low amp tube volume?

Guitar Amp Attenuators

One of the easiest and most reliable ways to overdrive a tube amp at low volume is to use an attenuator. There are many of these devices which are specifically designed to be used with guitar amps for this very purpose.

How can I make my amp sound better at low volume?

Super easy right now if you have in your amp it'll say preamp out power and up in preamp. Out is send power amp in is return.

Do you need an overdrive with a tube amp?

Most tube amps won’t need a distortion pedal, digital or otherwise. When an amp has both a dirty (gain) and a clean channel, this allows you to dial your distorted tones along with whatever clean sound you might want to use.

What is amplifier overdrive?

In a general sense: Overdrive refers to the sound made by a tube amp that’s pushed to its operating limit. Indeed, the purest overdrive sound comes from a maxed out tube amp, but since many players don’t want to blast their audience with too much volume, they use stompbox effects pedals to create overdrive.

Is gain the same as overdrive?

Gain is the amount of distortion(signal clipping) added to the signal. Overdrive is just a form of distortion, its a mild form mostly used to over drive the tubes of a tube amp to get a nice tube amp crunch.

Which is better overdrive or distortion?

In short, a distortion pedal is a lot more aggressive than an overdrive pedal in the way that it affects your tone. An overdrive amp will boost your amplifier or will mimic a sound, whereas a distortion pedal will entirely alter your sound.