How to judge a mix, on e.g. muddiness and balance?

Asked by: Troy Blankson

How do you judge a good mix?

4 Answers

  1. Listen to reference songs. Pick a set of professionally produced songs that are similar to whatever you are mixing. …
  2. Use visual aids. This is specially useful if you don’t trust your listening environment (ears, speakers, room, etc). …
  3. Listen your mix through many different systems.

How do you balance mixed frequencies?

Balancing the high-frequencies

  1. Set the filter to only react to the highest frequencies of the sound. …
  2. Set the ratio to around 1:1.5.
  3. Change the threshold so the audio you want to effect surpasses the threshold.
  4. Now increase the amount until the audio feels like the top end is glistening.

How do you know if your mix is balanced?

Listen it's just. So quiet but all i can hear is the vocal the vocal is right out front it's right in there i can't hear the drums i can't hear anything that's going on in the bass.

What judges look out for in a singing competition?

Categories for Judging Singers

  • Stage Presence/Audience Communication.
  • Diction.
  • Intonation.
  • Vocal Quality.
  • Rhythmic Interpretation.
  • Dynamics.
  • Song Choice/Song Prep.

How do you judge the quality of a song?

Judging Criteria

  1. Vocal Technique – Tone Quality, Breath Support, Intonation, Diction and Articulation. …
  2. Performance – How well the performer is able to express the meaning and mood of the song.
  3. Show Design – Music Selection, Effective use of Stage and Performance Area, Outfit and style.

How loud should my mix be?

Mix loudness varies on a case by case basis, but most mastering engineers recommend around -6dB Peak loudness, with an average of -18 LUFS integrated. While we’re on topic, check out our article all about: how loud your master should be.

How do you set a mix level?

Which is how I start I'll choose the most important element set the fader to zero. And then start bringing everything around it so once you've done that you can move on to the other parts.

How loud should the beat be in a mix?

How loud should your master be? Shoot for about -23 LUFS for a mix, or -6db on an analog meter. For mastering, -14 LUFS is the best level for streaming, as it will fit the loudness targets for the majority of streaming sources, but it’s okay to go louder (-7 to -10) so that your music stacks up well on other mediums.

What dB should a final mix be?

So long as your mixes give the mastering engineer room to work, and cover your noise floor, then you’re in a good range. I recommend mixing at -23 dB LUFS, or having your peaks be between -18dB and -3dB.

Should snare be louder than kick?

The snare is the foundation of the backbeat, and typically one of the loudest elements in the mix. Next, bring the kick fader up until it sounds almost as loud as the snare. It should be loud enough that the low frequencies are rich and powerful, but not so loud that it masks the bottom-end of the snare drum.

How do you balance a mixer sound?

So that the volume is about where you want it when the fader is at level zero. Below that with a button to turn on 100 Hertz high-pass filter which is used to reduce pop noises.

How do you equalize a mixer?

The position of the black knob is immaterial. Base is set at 80 Hertz low frequency rather this is a simple boost. And cut so that's your EQ.

What dB should vocals be in a mix?


If you mix them too loudly, they will stick out. What dB should vocals be recorded at? You should record vocals at an average of -18dB for 24-bit resolution. The loudest parts of the recording should peak at -10dB and be lowest at -24dB.

What level should vocals be in a mix?

Here’s how loud your vocals should be in a mix: Your vocal level should be lower than the drums, but louder than the instrumentation.

How much louder should vocals be than beat?

Vocals should be -18 dB when recorded at the standard 24-bit resolution; louder parts of the track can be recorded at around -10 dB. The vocals and the beat need to be evenly balanced.

Should 808 be louder than vocals?

Just make it loud in the context of the mix. Especially in hip hop, kick drums like the 808 tend to be the loudest instrument in a mix. Instead of dressing up an 808 with half-a-dozen signal processors, just try making it louder than the other instruments.