How to free up a rusty trombone slide?



Asked by: Josh Ramos

There’s a happy medium to be found; try Vaseline as a cheap starting point, mix in a little valve oil to thin it, and if you can’t find a consistency you like, hit your local music store for the real stuff. If that doesn’t smooth out the slide, the outer slide tube is probably severely pitted.

How do you get rust off of a trombone?





To remove tarnish from your trombone:

  1. Get an acidic brass polish from the store, or alternatively use lime juice, vinegar, or even ketchup.
  2. Apply the polishing agent and wait several minutes.
  3. Wipe down the trombone gently with a damp cloth.
  4. Repeat if some tarnish remains.


How do you clean an old trombone slide?

Use some isopropyl alcohol (rubbing alcohol) and some soft cotton cloth to wipe down the outside of the inner slide. Wipe until the cloth comes clean. Apply Trombotine to the stockings (lightly) and work it into the entire length of the inner slide tube with your thumb and forefinger.

How do you unstick a trombone slide?

Look for the link to that video in the description view up first of all for almost all stuck tuning sides just put some penetrating oil on where the slides come apart or supposed to come apart.

Can you use wd40 on a trombone slide?





Yes, of course. * Use it to help free stuck tuning slides.) Just order some proper stuff online!

Can rusted brass be restored?

Mix ½ cup of baking soda with 1 cup of white vinegar to create a paste (you can also add 2 tbsp of table salt if your piece is badly tarnished). The paste will fizz for a few seconds. Once the paste has stopped fizzing, rub on to your brass hardware in circular motions with a toothbrush.

How do you remove rust from musical instruments?

The easiest way to remove rust from your guitar parts is to simply soak them in white vinegar. Use a container that is big enough for the parts you need to soak and submerge them in white vinegar for three to four hours. Remove each part from the white vinegar bath and gently scrub off the rust with a shop cloth.

Can you use vinegar to clean a brass instrument?

Mix together 1/2 cup of vinegar, a teaspoon of salt, and a sprinkling of flour until it forms a paste. Spread the mixture on the brass and allow it to sit for a few minutes. Rinse with cool water and dry. (This method also works on corroded brass.)

How do you clean and oil a trombone slide?

First, clean any dirt from inside the slide, then apply a bit of slide cream (or slide oil) on the slightly thicker end sections of the slide (the stockings). Do not use slide grease. 2. After applying slide cream, use a water spray bottle to moisten the slide sufficiently.



How do you clean the outer slide on a trombone?

Slide quite often when I see fellow trombonists clean their slider all I'll see them do is take the outer slide off wipe down the inner. Slide real lubricated put the outer slide back on and consider

What can I use instead of trombone slide oil?

Oil. I don’t generally recommend using oil for trombone slides, but it is an option if you’re caught without anything else. Use a good quality valve oil, preferably something on the heavier/thicker side and apply several drops to the top of the inner slides just like you would with a liquid lubricant.

Can you use Vaseline on a trombone slide?

‘Vaseline’ is fine for all slides wether brass or nickle



How often should I oil my trombone slide?

Generally, you will want to grease your trombone slide with a proper lubricant every week or two, depending on how often you play your instrument.

Does WD-40 clean brass?

We like to use WD-40. It is not only very easy to use, but is also quick and very effective. All you need to do is coat the gold and brass lamp with a layer of WD-40, which is a great to clean brass and let it sit for about 15-30 minutes.

How do you get rust off a brass instrument?

Use fine steel wool to remove any corrosion from the brass. Scrub the surface of the item with steel wool until until all rust and corrosion are gone.

How do you remove heavy corrosion from brass?

Combine the juice of half a lemon with a teaspoon of baking soda and stir until it becomes a paste. Apply the paste with a soft cloth. If the tarnish is heavy, let the piece sit with the paste on it for 30 minutes. Rinse with warm water and dry.



Does vinegar harm brass?

In many cases, simple household products such as vinegar and salt can clean brass. They’re a safe and inexpensive alternative to commercial cleaners.

Can corrosion on brass be removed?

You can remove brass corrosion with vinegar. Create a paste of equal parts salt, flour and white vinegar for another acidic option that can clean your brass hardware. Apply the paste in a thin layer and let it sit for an hour or so. Rinse with warm water and dry the brass.

Can Coke clean brass?

Although it’s not our personal go-to for cleaning brass, Coca-Cola can be used to clean brass. Actually, any type of cola soda can be used, too. Just rub the cola of your choice on your brass and leave it for about 10 minutes so it can really sink in. Afterward, give it a rinse to reveal your newly cleaned metal.

Is baking soda good for brass?

A combination of baking soda and vinegar is a great option to clean brass, as the acetic acid in the vinegar and the sodium in the baking soda work together to dissolve the tarnish.



What is the best homemade brass cleaner?

To make an inexpensive homemade brass cleaner, mix equal parts salt and flour with enough vinegar to make a thick paste. Rub on vigorously with a damp cloth. Then wash, rinse, and dry thoroughly.