How is string height adjusted for a neck with a compound radius ?

Asked by: Melissa Britton

How do you adjust the radius of a compound neck?

Compound radius. Play your open chords on a smaller radius down the bottom, Barre on a slightly flatter radius in the middle, and pull those huge string-breaking bends on the flattest radius towards the higher frets. Cool. If that’s your cup of tea, go for it.

What is a compound radius neck?

A compound radius neck has a smaller (rounder) radius at the nut, and a larger (flatter) radius at the neck and body joint. As the neck gets wider, the fretboard gets flatter, which is said to be an aid when soloing, especially when bending strings.

Is compound radius neck better?

A compound radius neck is a neck that has one radius at the nut and a different, larger radius at the heel of the neck. This is meant to give a better playing experience for both rhythm playing towards the nut side of the fretboard, and soloing towards the heel side.

How does neck radius affect playability?

A smaller (more curved) radius is generally perceived as more comfortable for playing chords; a larger (less curved) radius is generally considered better for single-note playing and bending.

How do you sand a compound radius?

Rather higher a little bit higher than the bed so that when I sanded in the radius he'd put a divot and the first fret. So what I had to do was add a steel plate.

How do you compound radius a fretboard?

If you want a compound radius you plane straight down the center. And then at an angle to the center following the angle of the fretboard.

Which Fender Stratocaster has compound radius?

Fender® American Deluxe Stratocaster® Neck, 22 Medium Jumbo Frets Compound Radius.

Where are neck radius measured from?

How Do You Measure It? As for the radius itself, in mathematics, the ‘radius’ is the distance from the center to the circumference (or edge) of a circle. In this case, the fretboard is placed at the top of the circle and the arc from one edge to the other is the size of the radius.

How do you measure the radius of a guitar neck?

How to measure the fretboard radius

  1. Find the guitar radius gauge that matches the arc (or radius) of your neck. …
  2. Use a ruler graduated in 32nds or 64ths of an inch to measure the height of the top and bottom E strings. …
  3. Set the gauge on top of the strings next to the bridge.

What is the best guitar neck radius for small hands?


People with small hands tend to have an easier time playing on flatter, thinner necks, which means that they will often benefit from a fretboard radius that is 12“ or above. This is why shred guitars like the John Petrucci Signature series for example, have a fretboard radius of 16″.

Which guitar neck radius is easiest?

There are different sizes of nack radius for different guitars, however, a 9.5 to 12-inch neck radius is best for small hands. With these radius sizes, guitars are easy to hold and play.

What is the neck radius of a Gibson Les Paul?

12 inches

Just because it feels so good. On the other side of the spectrum, Gibson opts for a radius of 12 inches for a Les Paul.

How do you attach sandpaper to radius block?

You can also cut regular sandpaper to fit, securing it to the blocks using double-stick tape. Cut your sandpaper just a little longer than the block, allowing it to overhang the ends. Crease the edges of the paper upward to cover the edge of the block. This keeps the paper from curling under while sanding.

How do you set the radius of a bridge?

In order to set my string height I'm going to put a capo on the first fret to eliminate my nut from the equation. And then I'm going to shoot for about two millimeters or 5/64 inches at the 17th fret.