How do you mic a guitar amp?



Asked by: Sara Falconetti

Should you mic your guitar amp?





You mic a guitar amp to be able to capture the essence of the guitar player’s feel, the sound of the room where it is recorded and finally, to capture the fullness of the sound a guitar amp will provide.

Can you hook a mic to an amp?

Answer: It is possible to connect your mic to an instrument amp when you are in need of a way to amplify vocals without the use of a PA system. However, it is important to understand that an instrument amp is designed to amplify instruments and will require more than an adapter cable to successfully connect your mic.

How do you record a guitar amp?

Basically you want to point the mic. At the amp and not away from the amp. There's two speakers in this to 12-inch speakers I'm using the off-axis technique.

How do you mic a practice amp?

The first thing you're going to do is find the speaker cone you can shine a flashlight on the grill of the amp at an angle this usually makes it easier to see next you're going to place the mic.

How do I record my guitar amp without a mic?





You could even adjust the tone of your guitar track without even leaving your seat. The best part is you don't have to invest in expensive microphones. And that expensive tube amplifier to do this.

Can I plug guitar into mic input?

Mic level is very low voltage, and low impedance. Guitar level is fairly low, and much higher impedance. Line level is fairly high impedance, and also generally a higher voltage than a guitar. A lot of times you can run a line input into a “guitar” (DI) input with no problems.

Where do I plug my mic into my amp?

How to Connect a Microphone to an Amplifier

  • Insert the XLR to 1/4-inch cable into the XLR connection port on the bottom of the microphone. …
  • Plug the free 1/4-inch cable into the 1/4-inch end of the adapter.
  • Connect the available end of the 1/4-inch cable into the “Line-In” port on the front of the amplifier.

Can a guitar amp be used for vocals?

The guitar amp’s limited frequency range does a poor job at playing vocals properly. But if you don’t have money to buy a proper PA System, it is possible to play vocals through your guitar amp. The best method is to use a multi-effects pedal that offers a mic input.

What do I plug my microphone into?

Microphones typically plug into mic preamplifiers (which can be standalone devices or built into mixers, recorders, interfaces, etc.). However, mics can plug into any audio input with the proper connection.



How do you mic a metal amp?

Start with placing the microphone straight into the centre of the speaker. This will give you a very nasty sound with a lot of presence and attack.

How do I record from my phone to my guitar amp?

For an android phone: Plug a 3mm male to male cord in the headphone out on the amp. Plug the other end of the male to male 3mm into the headphone side of a 3mm audio splitter. Open the recording software that comes with your phone. Plug in the male jack from the splitter (need a 3 ring male) into the phone.

Can you record with a practice amp?

Can you record professionally a guitar with a practice amp. Yes yes and yes would be the answer to that I mean what would we call a practice amp I suppose.



How can I record my guitar amp at home?

What is the best way to record electric guitar?

  1. Place a microphone in front of your guitar speaker.
  2. Place a microphone in front of your guitar speaker using an isolation box.
  3. Using a (real) amplifier with a load box and use impulse responses to replace the speakers and microphones digitally.

Should you record guitar dry?

Most engineers and mixers favor dry, since it is easier to add effects than it is to take them away. The primary argument being that if a guitar is recorded with reverb and or delay, it can cause problems later on as the mix builds, particularly if there’s too much of either.

Should you record with pedals?

Traditional amp tremolo and vibrato can sound incredible, but pedals have closed the gap in recent years and both tend to sound more authentic than plugins. But for flanging, chorus and phasing, plugins can be your best bet and they provide far more control.

How loud should you record guitars?

Recording guitar at around -14 dB is a good starting point. The most important point to keep in mind is to avoid clipping. Recording guitar at around -14 dB should avoid clipping, but you may need to raise or lower your level depending on your style of playing.