Headphones impedance for bass guitar combo/DI box?



Asked by: Lawrence Jordan

Do high-impedance headphones sound better?





So is high or low impedance better? High impedance is better because it delivers superior sound quality. However, low impedance equipment is more suitable for casual listening on phones or laptops. High impedance equipment is geared towards professional use or audiophiles because they require bulky special equipment.

What is good impedance in headphones?

The impedance is measured in ohms which often range between 8 & 600 ohms, depending on the model of the headphone/earphone. However, the impedance ranging between 20-40ohms is said to be a decent choice for casual music listeners and 64 or above for an audiophilia.

Is 32 ohms good for headphones?

32ohm or below is the impedance most commonly found on commercial headphones. Due to their low ohmage, these headphones are generally best suited for consumer devices that have built-in amplifiers.

What does 32 ohms of impedance mean for headphones?

These days, 32 ohms is standard for an impedance rating. Most headphones that you see around can be powered by the inbuilt amplifiers inside a smartphone or DAP. Typically these headphones have a low impedance. However, when you look for audiophile-grade headphones, the impedance significantly increases.

Is 80 Ohm or 250 ohm better?





With its better bass output, the 80 Ohm version is better suited for listening for enjoyment. You’ll be getting more out of 80 Ohm while listening to music or gaming. If you’re looking for headphones for studio work, the 250 Ohm pair will be better with its wider frequency response.

Can I use 250 ohm headphones?

You can technically use 250-ohm headphones without an amplifier; however, the audio that is produced will be sub-par to what they are designed for, outputting a meager volume (if any volume at all), having distortion in low frequencies, and being muddy.

Is 80 or 32-ohm better?

I could listen to them all day, honestly. So how does the 32 ohm version compare to the other models? All three do share the same overall sound signature, soundstage, and speed…but the 32 ohm is closer to the 250 ohm version. They’re both a little bit brighter and less bass-focused than the 80 ohm model.

Is lower or higher ohms better?

The lower the impedance, the more efficiently it allows the electric signal, which is basically the music, to pass through the speaker. Most speakers are rated at 4, 6 or 8 ohms, and cheaper receivers can sometime have issues driving low-impedance (namely 4 ohm) speakers. ELAC speaker designer Andrew Jones.

Can you use 80 ohm headphones without amp?

80-ohm headphones will work without an amplifier, but the audio they produce will not be of the quality they are designed to produce.



Can a laptop power 80 ohm headphones?

Even though the impedance is so low, they require an amp with a sensitivity of 91 dB per mW. To answer the question directly, yes you should get an amp for 80 ohm headphones because there will be a big performance improvement.

At what impedance should I get an amp?

For optimal sound with all types of headphones the headphone amplifier’s output impedance should be as low as possible, ideally no more than 2 ohms to ensure adequate electrical damping even with 16 ohms headphones. A dedicated high quality headphone amplifier should achieve this.

Can you use 80 ohm headphones with phone?

I have owned the 80ohms version for some years and you’ll really want a amp for them.. They work fine with my Axon 7, but it has a built in amp. They won’t get very loud on most phones, but they will work if you’re okay with mediocre volume.



What is the difference between 32 Ohm and 80 ohm headphones?

the 32 version is more optimized for portable devices. the downsides are that it will have less bass and less quality. the 80 is not all that hard to drive, and even the 250 is not. some onboard audio cards can certainly power them though not to their fullest. to get the most out of them you would want an amp.

Can an iPhone Power 250 ohm headphones?

Quick Answer: We tested these headphones on a variety of iPhones (iPhone 8, iPhone 10, iPhone 12) and we found that the iPhone is capable of powering 250 ohm headphones for music listening at a loud volume.