Getting sound from external speaker with an audio interface?



Asked by: Michelle Horner

Can I connect speaker to audio interface?





As indicated by everyone, yes you can connect PC speakers to an Audio Interface. The question is why would you want to? If you’re involved enough in producing music to have an Audio Interface, you need better speakers. Studio Monitors.

How do I get sound from external speakers?

And verify that your speakers are actually powered. On if your speakers do not have their own separate power button try turning the volume dial as it may also be the power control for the speakers.

Do you need to connect speakers to audio interface?

You do not need an audio interface to connect your monitor speakers to a laptop or computer. You can do this using a simple 3.5mm headphone jack to ¼ inch “Y” cable. However, it is still recommended that for best performance you eventually use an audio interface to connect.

How do I connect passive speakers to audio interface?

There are a couple ways you can do this one is to just take this speaker wire and plug it directly into the back of the amp. And then plug it directly into the back of the speaker.

How do I connect my speakers to my Focusrite 2i2?





Below i'm going to plug the red one into the right output. Of your audio interface the focusrite scarlett 2i2. And then i'm going to connect that to the back of the yamaha. Hs5.

What cable do I need for audio interface speaker?

We’re going to share 7 different methods to connect any audio interface to a set of studio monitors or powered speakers. Quick Answer: A balanced connection with a TRS or TRS to XLR cable would always be our first choice.

How do I connect my audio interface to my computer speakers?

To connect to the internal audio interface of the computer, we must locate an analog output. This, again, is typically the 3.5 mm headphone jack. Using a 3.5 mm male-to-male TRS cable, we can connect the computer to its speaker. Plug one end of the cable into the computer and the other end into the speaker.

How do I enable external speakers?

Click on the Start menu & head towards system Settings. Go to the System, followed by Sound option. Ensure your devices aren’t disabled by any chance, so select the external speaker & go to its Device Properties for your input & output devices.

Why do my external speakers not work?

Check if the external speaker is set to the default output. Ensure the external speaker has power and the cables are connected properly. Connect external speaker/headphone to another device and check for sound. Test your computer’s hardware.



How do you use a non powered speaker?

This is where your magic happens this is the Amplatz. Into the speaker now this amp is made for this speaker it doesn't come apart.

Can you connect an amplifier to an audio interface?

The simplest way to connect a guitar amp to an audio interface is by using an output labeled ‘line out’ on the amplifier. This is sent to the input on the interface using an audio cable, where the signal from the amplifier can be recorded.

Can I use hifi speakers as studio monitors?

From a more practical point of view, nearly all studio monitors are magnetically shielded so that they can be used in close proximity to CRT computer screens; hi-fi speakers may not be.



How do I convert speakers to studio monitors?

As it is going trs to trs these are both equal in every way i present this one second only because it is a little less common because you need to go and buy a special cable that converts trs to xlr.

What is the difference between studio monitors and hi-fi speakers?

If we could sum it up in the simplest layman terms, hi-fi speakers are meant to sound good with any sound and in any space, while studio monitors are meant to sound bad (for want of a better word).

How do I make a studio monitor speaker?

If you can make your mix sound good on speakers that don't naturally sound very good it's gonna be a good mix. So then you have your artist or moneymen monitors. Those are usually bigger nicer.

How do I set up studio speakers?

I tell you don't want to window off to one side but not off to the other side that window should be behind you or ideally I'd say in front of you some great reason to put a window in front speakers.



How do I monitor speakers?

Right-click the audio icon in the system tray area of the Windows taskbar and select “Playback devices.” If you connected your monitor via HDMI or DisplayPort, click the name of your monitor in the list of devices. If you connected via 3.5 mm audio and DVI or VGA, click “Speakers.”