Do electronic instruments need to be EQ’d?



Asked by: Kristy Pace

Do virtual instruments need EQ?





SO…it doesn’t matter how amazing your samples sound, if they don’t fit alongside your other tracks or are covering them up, you need to use EQ to help things gel together better. They are not excused from any EQ treatment simply because they are MIDI tracks or virtual instruments.

What is an EQ instrument?

Used on every instrument, in all playing situations and on all recordings, EQ is arguably the most common tool utilised to make music sound better. EQ balances the frequencies, or range of frequencies, within a sound by adjusting their individual volume levels.

Do you need to EQ?

EQ is the most important tool in your mixing arsenal. Mastering it is the key to crafting clear, larger-than-life tracks. Abusing it, however, will put you on the fast track to wimpy, muddy mixes.

How do you EQ multiple instruments?

And also some of the harsh mid frequencies and without the EQ it sounds like. This. It's not so much different compared to where the EQ. It's a bit flat. You know in the dynamic.

Should you compress VST instruments?





You’re going to want to compress these sounds to get a more even sound, as this is the hallmark sound of professionally produced music today. However, if you’re using a lot of virtual instruments, you may find you can get away without compressing every track.

How do you mix virtual instruments?

Or you might be mixing a song where they've picked really good sounding patches they sound good by themselves and they might be appropriate for the song in the arrangement.

How do you EQ an electric guitar?

EQing Electric Guitar Process

  1. High and Low-Pass Filters.
  2. Remove Mud from Electric Guitar.
  3. Remove Harshness & Resonances.
  4. Reduce String Noise or Increase It using EQ.
  5. Increase Pick Attack or Decrease It with EQ.
  6. Reduce Distortion Hum.
  7. Add Mid/Side Processing for Width.


What is EQ in music tech?

If you’re stepping into music production for the first time, you might be wondering, “What does EQ stand for?” In music, EQ stands for Equalization, which is a plug-in intended to manipulate the frequency content of your recordings, and help all of the elements of your production work together sonically.



How do you EQ an electric piano?

If you need the sound to cut through the mix try boosting slightly in the 1 to 2 kilohertz range or you may even need to cut a little in this area to make room for other instruments.

How do you EQ EDM lead?

So in the masking phase you can just make it super loud. Now we're going to move on to the next leap which is going to be the drop lead here and it sounds.

How loud should each instrument be in a mix?

The ideal listening range for most home studios is around 73-76dB SPL. But mixers have no control over how loud people listen to music. Only how loud each element is in the track. That’s why it’s crucial to make sure that your mix is balanced and each instrument is at the proper level relative to the other channels.



Can I use two equalizers?

The common engineer saying, “boost, then cut”, refers to making individual adjustments within a single EQ. This same concept can be applied when using two EQs—one to remove sour frequencies and another to boost sweet ones.

What are the three types of equalizers?

The different types of EQs in audio are as follows:

  • Graphic EQ.
  • Parametric EQ.
  • Shelving EQ.
  • Linear Phase EQ.
  • Dynamic EQ.


What are the four types of EQ?

Each has a different function, purpose, and characteristic sound. However, the most common types of EQ used in music production are parametric, semi-parametric, dynamic, graphic, and shelving.



Do different EQs sound different?

One of the main reasons EQs with the same settings can sound different is because many modern EQs emulate the analog EQs from classic consoles and outboard gear. However, analog EQ design involves multiple tradeoffs.

Are all digital EQs the same?

You might be sitting there thinking (hey my Waves, URS, Vox, blah blah sound completely different). With some emulation plugins you have EQ+X. X can = Saturation, bandwidth limits, softclips, offset numerical values, & so on.

How many EQs are there?

In summary, the 5 main different types of EQ are: Shelving EQ. Highpass/ Lowpass Filter EQ. Graphic EQ.