Custom Nut Width Dreadnought – String Spacing?



Asked by: Pin Dowling

How far should strings sit in a nut?





Nut Slots: Depth



Big deep slots and a quarter-inch of nut above the strings just looks a bit rubbish. Ideally, your wound strings should have about half to two-thirds of their diameter in their slots and the unwound strings should sit just below the surface.

How far apart should acoustic guitar strings be?

The space between strings will be different from guitar to guitar, however: most 12 strings are about 1-7/8 at the nut (fretboard width) – depending on how you play the outer most strings will be spaced in somewhere between 0.100 to maybe 0.125.

How do you measure string spacing on a nut?

As we just learned, the string spacing is measured from the center-to-center of the two outside strings on your guitar. On the other hand, Nut width refers to the total width of a guitar’s nut from one edge to the other.

How much space should be between guitar strings?

The “action” or distance between the strings and the neck differs among guitar players, but 1.6 mm (0.063 in) is standard for most guitar players.

How wide should nut slots be?





In making an ideal nut you will want the actual width of the nut slot to match the width of the string exactly. A string whose width is . 017”, or seventeen thousandths of an inch, wants to sit in a slot that is exactly seventeen thousandths of an inch.

Can a nut slot be too wide?

A too-wide nut slot is not necessarily all that bad.



The strings may still bear at the front edge, be supported along the entire slot, be at the right height and spaced evenly. If your nut has deep grooves that are too wide, and the whole thing looks messy, don’t fret.

What acoustic guitars have the widest nut width?

Which guitar has the widest nut? The Cordoba C10 and C12 are both at 2.04″ nut width, which is the widest we’ve ever seen. However, it’s likely there are other six-string classical guitars out there with a a similar measurement, perhaps even slightly wider.

Does guitar nut width matter?

It’s commonly thought that nut width is important with regard to your approach to the guitar e.g. do you play mostly with a pick or play fingerstyle. But for the most part nut width is less important than string spacing as nut width mostly affects the fretting hand and not the picking hand.

Where is guitar string spacing measured?

String spacing is measured from the center of one string to the center of another string; this results in the actual spacing between the lower strings, which are thicker, being smaller than that between the higher strings, which are thinner.



Does string spacing matter?

Some people find that narrow nut and narrow string spacing is more comfortable for flatpicking, but other’s want a narrow nut and wider string spacing. There’s no set of measurements that’s more well-suited to one style than another. It comes down to the player’s hands and what you find comfortable.

How do you calculate fret spacing?

If you divide any scale length by the constant 17.817, you will get the distance from the front edge of the nut to the first fret. Here is one example: a scale length of 25.5″ (650mm) divided by 17.817 gives 1.4312173″ (36.482011mm), which can be rounded down to 1.431″ (36.48mm).

How deep should guitar nut slots be?

The slots should be only deep enough so 1/3 of the string is above the top of the nut and 2/3 in the nut.



How do you measure nut width on a guitar?

Says it's a one in three quarter inch nut when we measure the widest part of the neck that's what it appears to be when we measure that top point of the fretboard.

How do you build a guitar nut slot?

I'm gonna throw this q-tip into the pocket there. So that's gonna set up like that and then I'm gonna take another little drop of that then cyano glue. There we go so that filled up that q-tip.

Does nut height affect intonation?

High strings at the nut can cause sharp intonation and make playing in first position difficult, while low or worn slots can result in open-string fret buzz. Generally, the bottoms of the nut slots should be a few thousandths of an inch higher than the tops of the frets when the neck is straight.

How do you deepen a nut slot?

First I'll take a little of the material off the top of the nut. And get this in clean material. So I can see better. And then what I'm going to do is put pencil let in these slots.



Should the guitar nut be glued?

Is it necessary to glue a guitar nut in place? Gluing the nut is not completely necessary, the pressure of the strings and the friction between the nut and neck will hold it in place. However, you can use a few drops of white wood glue to fix it in place to prevent it falling off when changing strings.

Can I use superglue on guitar?

As we’re going to point out in a minute, super glue is good for SPECIFIC tasks in guitar assembly and repair. But it’s not good for everything. Because super glue is so strong, it’s not a good choice for any wood-to-wood joints. It would never be used to attach the neck to the body, for example.

What is a zero fret nut?

The zero fret is positioned at the location normally occupied by the nut. On a guitar having a zero fret, the nut is located behind the zero fret and serves solely to keep the strings spaced properly. The strings rest atop the zero fret, which is generally at the same height as all the others.