Asked by: Rob Martinson
Most mixers have a pair of of outputs (stereo) labeled “main out” (or similar), usually you’d use those to set to the interface rather than the signal from the headphones out. there may be impedance issues using headphones instead of normal line out (?)
Can I connect headphones to audio interface?
You should plug your headphones into the audio interface as it usually gets good results. Occasionally it is necessary to use studio monitors instead, but some form of audio output will always need to be plugged into the interface. This allows you to hear the sound which you are recording.
How do I connect my headphone amp to my audio interface?
Connecting Headphones to a Balanced Interface
Make peace with your interface’s headphone output – It may not be loud, but it is free. Double amp to an unbalanced amplifier – Connect a stereo patch cable from your interface’s headphone output to the input of an ordinary headphone amp.
Can I use USB headphones with an audio interface?
The USB headphones are their own audio device. Your computer does not even need a sound card if you are using USB headphones. However, your computer MUST have a USB port. So you cannot use these headphones with a phone or MP3 player.
How do I connect my headphones to my sound mixer?
Amp is by using a balanced quarter inch cable to connect the two from the headphone jack of the audio. Mixer. Into the input on the headphone.
How do I connect my headphone amp to my Scarlett 2i2?
So this cable has two unbalanced ts lines one for left one for right. And it will merge them into an unbalanced stereo signal with the trs. Connection.
How do I connect my AUX to audio interface?
The first and simplest. Option is a 3.5 millimeter to stereo xlr adapter. This adapter has a 3.5 millimeter trs plug on one end. And two male xlr connectors on the other.
Can you use a headphone jack as a line out?
So can a headphone output be a workable substitute for a line level output in other situations? Sure, in a pinch it will usually work okay. Headphone amps usually aren’t as free from noise and distortion as good line amps, but in many situations they can be used without significant degradation in overall sound quality.
How do I use my headphone jack as an audio input?
In the ‘Sound’ window, click the ‘Input’ tab. Your headset should be visible in the ‘Select a device for sound input’ section. Make sure to select your chosen input device. “Sound” window with “Input” and “Select a device for sound input” highlighted.
Can I use a headphone jack as an aux?
The standard aux connector size is 3.5mm, while headphone jack sizes vary from 2.5mm to 6.35. You can use a headphone jack for an aux-in, but not the other way around. Auxiliary cables are essentially used for mixing consoles.
Is audio Out Same as aux?
There is no difference but the name. Both would be designed to be used with a source that puts out about 2v max. If an input is labeled “phono” it may have a phone preamp connected for turntables that do not have one built in or it may be a line level audio input labeled for use with a turntable with a preamp built in.
Is 3.5 mm jack same as aux?
Are AUX (Auxiliary) connectors & headphone jacks the same? The construction of the aux connector and the headphone jack is often the same: 3.5mm (1/8″) TRS. However, the “auxiliary connector” is universal for audio while the “headphone jack” is, by its name, suited for headphones.
Is aux the same as line out?
Typically, the only differences between aux/line out and headphone out are: impedance. connector (but not necessarily – usually the headphone out is stereo out of one cable, while line outs are generally separated into L and R, and may use the same connector port as the headphone out)
What are line outputs for on an interface?
In terms of outputs, almost all audio interfaces provide you with a stereo pair of 1/4″ line outputs, which can be used to feed your monitor speakers. Others give you additional analog outputs, which you can use for connecting to other hardware in more sophisticated setups.
Can I connect headphone output to amplifier?
Connecting headphones out to an amplifier’s line-in is ok. Audio won’t be as great, but it’ll not damage the amplifier or speakers. The voltage in headphones out connection isn’t all that high to damage a line-in. Headphones out connections have a low output impedance.