Can I connect an amplifier head to the top of my existing amp?



Asked by: Timothy Ahmed

A normal head includes a pre and power amp, but you can buy the two separately and then combine them. If you have a pre amp, you can plug the output in to the effects loop. This would allow you to use the new pre amp and the existing power amp and speakers.

Can you plug an amp head into an amp?





Can You Use an Amp Head With a Combo Amp? In short, yes. Combo amps have a speaker cabinet built-in, but many manufactures leave the connection visible on the back panel of the amp.

Can you hook an amp up to another amp?

A simple method you can use for connecting one amplifier to another amplifier is by employing an active crossover. This device separates the high-end frequencies of the audio from the bass frequencies so that they can be sent to separate amps and thus different speakers.

How do I connect my head to my amp?

So if you've got a solid-state amp. And you running it through a speaker cabinet which has got a higher impedance. Than the minimum load stated on the back of the amp.

Can you stack amplifiers on top of each other?

So within reason (we’ll get to this a bit later…) you can safely stack your equipment on top of one another. There are some other things you need to know though. The first is your amplifier, or if you’re using a separate pre and power amplifier the power amp section.

Can you hook two amps up together?





Can You Have Multiple Amps in One Car Audio System? The short answer is that you can use any number or combination of power amps in a car audio setup as long as you wire them in properly. The main proviso is that the charging system has to be able to provide enough juice in the first place.

Can you connect 2 amplifiers together?

Most people have the tendency of using a second amplifier to make their system louder. They go to the extent of running 2 speakers into the amplifier at the same time to effectively increase or even double their power. You can successfully bridge amplifiers in this way in your car stereo system.

How do you connect two amp heads together?

It's a super pervasive unavoidable hum that comes when you run two amps together through a stop box of any flavor or through an ABY box.

How do you connect two amp heads to one cabinet?

Okay just plug the speaker cable into each output of the two different amplifiers you're going to run those back into this unit. And then you're gonna take one output out of this to a cabinet.

Why Do People stack amps?

Stacks can be better for studio settings



This arrangement also lets the player or the producer hear the amp and speakers just as the microphones do, which leads to a better performance and mix.



Does an amp head need a cab?

You can’t use an amp head without a cabinet – you need both components. While gear companies usually make amps and cabinets that are meant to go together, you can mix different models and brands, as long as you match the amp with the correct speaker impedance.

Is a half stack worth it?

Pros: Half stacks can be easily upgraded to full stacks when needed while also offering much of the roar of a full stack. They also generally cost less and are easier to to transport and set up than full stacks. Cons: Though they weigh less than full stacks, a 4×12 cabinet is still a very hefty object to move.

Do you need a half stack?

But do you NEED a half-stack? There is no real difference in Volume between Halfstack, Stack and Combos. There is a difference in tone. Halfstacks or Stacks in general tend to have more bass because of their closed back, something most combos don’t have.



What is the difference between an amp head and cabinet?

Amp Head & Cabinet Setup



The amp head and cabinet setup is two separate pieces of equipment. The head is an amplifier by itself with no speaker. The cabinet is the speaker. If you’re at a huge rock concert, the tall stacks of equipment are an amp head and cabinet setup.

What is an amp half stack?

A half stack- an amplifier head unit and a separate speaker cabinet which can hold up to four speakers, A full stack- same as the half stack configuration, except it includes one more speaker cabinet.