Audio quality recording?



Asked by: Miguel Reddy

How can I record best audio quality?





How to record high-quality audio

  1. Value your listeners. Podcasts and blogs are similar. …
  2. Invest in the right microphone. You knew this one was coming. …
  3. Use a microphone stand. …
  4. Find a great place to record. …
  5. Speak near the microphone. …
  6. Set up a pop filter. …
  7. Select an audio interface. …
  8. Record separate tracks.

What is the recording quality?

The sound quality of a reproduction or recording depends on a number of factors, including the equipment used to make it, processing and mastering done to the recording, the equipment used to reproduce it, as well as the listening environment used to reproduce it.

What is a good audio level for recording?

According to Pike, your audio level should stay on the negative side of the number scale and never go above 0. Anything above this results in distortion, which will make your audio torture to listen to. He suggests keeping your level at around -10 to -12, but this can vary depending on your project and your subject.

What’s the best recording quality?

So what do you choose for recording your audio? For pristine quality, always record in uncompressed formats like wav or aiff, at atleast 44,100 khz and 24 bit. Any subsequent processing like mixing, editing etc will not result in any degradation of the quality.

What is the best Kbps for audio quality?





There is no best bitrate, only the right bitrate.



More information, in a very general sense, means better sound quality. Audio CD bitrate is always 1,411 kilobits per second (Kbps). The MP3 format can range from around 96 to 320Kbps, and streaming services like Spotify range from around 96 to 160Kbps.

Is 128 kbps audio good?

For MP3s, most people find that 128 Kbps is a good compromise of file size and sound quality. At that rate, MP3 files take up roughly one megabyte of space per minute of music. The 128 Kbps rate is considered high quality for the AAC format, which is why iTunes comes factory set to 128 Kbps.

Which audio quality is best 128k or 256k?

A higher bit rate is better, so a 256 kbps MP3 or AAC file is better than a 128 kbps file.

How do you define sound quality?

“Sound Quality is a perceptual reaction to the sound of a product that reflects the listener’s reaction to how acceptable the sound of that product is: the more acceptable, the greater the SQ.” R. H. Lyon [1]. “The term Product Sound Quality refers to the adequacy of the sound from a product.

How do I make my recorded sound clear?


I might raise the low a little bit get rid of the mids. So that it kind of focuses on the depth of his voice the deep part.



How do I make my sound clearer?

So that's our audio recording. And first of all what we're going to do is we need to highlight. Everything that we want to edit. So the next thing they want to do is gonna go over to effects.

How do you record crystal clear vocals?

How to Make CLEAR Vocals

  1. High-Pass Filter and Gating.
  2. Subtract Low Mids.
  3. Saturate High Frequencies.
  4. Compress to Bring the Vocal Forward.
  5. Amplify High Frequencies.
  6. Use Bright Reverb.
  7. Limiting Your Vocal.




How do I make my mic sound professional?

Off axis so that you're actually speaking past the mic. Rather than directly into it because this will help with plosives. The p and b words that blow a lot of air into the microphone.

How do you add clarity to vocals?

And you'll see that it has a lot of clarity focus and brightness to the lead vocal. Be careful not to go too. Far. Let's do some before and afters by muting this duplicated.

How do you EQ your voice?

Applying EQ to a Voice Recording

  1. Use a High Pass Filter to Cut Everything Below 80Hz. …
  2. Cut 100-300 Hz to Add Clarity. …
  3. Cut 300-400 Hz if the Voice Sounds ‘Muddy’ …
  4. A Wide Boost Between 2-6 kHz Can Improve Clarity. …
  5. Cut Around 3-5 kHz if the Voice Sounds too Sibilant.




Do vocals need EQ?

An EQ is used on vocals in most professional studio recordings. That being said, the less EQ you actually need, the better. It’s always best to focus on getting the best recording possible rather than banking on the post-production process.